Note: Ingredients listed on restricted chemical lists
EC/CAS
201-134-4/78-70-6
Name of the chemical
1,6-Octadien-3-ol, 3,7-dimethyl
Concentration
20-<50%
EC/CAS
204-262-9/118-58-1
Name of the chemical
Benzyl salicylate
Concentration
5-<10%
EC/CAS
204-541-5/122-40-7
Name of the chemical
2-Benzylideneheptanal
Concentration
5-<10%
EC/CAS
203-113-5/115-95-7
Name of the chemical
3,7-Dimethyl octa-1,6-diene-3-yl acetate (40)
Concentration
0.1-<1%
EC/CAS
204-116-4/119-36-8
Name of the chemical
Methyl salicylate
Concentration
0.1-<1%
EC/CAS
204-317-7/106-24-1
Name of the chemical
2,6-Octadien-1-ol, 3,7-dimethyl-, (2E)
Concentration
0.1-<1%
EC/CAS
204-574-5/84-66-2
Name of the chemical
Diethyl phthalate (DEP),5
Concentration
1-<5%
EC/CAS
214-946-9
Name of the chemical
Galaxolide
Concentration
8,8- 1-<5%
EC/CAS
203-377-1
Name of the chemical
2,6-Octadien-1-ol, 3,7-dimethyl-, (2E)
Concentration
0.1-<1%
EC/CAS
201-550-6
Name of the chemical
diethyl phthalate (DEP)
Concentration
1-<5%
General Information
Version
12
Revision date
2023-12-12
Product name
JASMINE FRAGRANCE
Product Synonyms
None
1.2.1 Relevant identified uses
Fragrances
Emergency telephone
+44 1926 291009
Icons in SDS
Company Information
company name
Imperial Supply Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
support@craftovator.co.uk
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H411
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Signal word
Warning
Hazard statements
H315, Causes skin irritation. H317, May cause an allergic skin reaction. H319, Causes serious eye irritation. H411, Toxic to aquatic life with long lasting effects.
Additional information
EUH208, Contains GERANIOL, LINALYL ACETATE, METHYL CINNAMATE, METHYL ISOEUGENOL, METHYL SALICYLATE, PHENYLACETALDEHYDE. May produce an allergic reaction.
Precautionary statements
P261, Avoid breathing vapour or dust. P264, Wash hands and other contacted skin thoroughly after handling. P272, Contaminated work clothing should not be allowed out of the workplace. P273, Avoid release to the environment. P280, Wear protective gloves/eye protection/face protection. P302/352, IF ON SKIN: Wash with plenty of soap and water. P305/351/338, IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333/313, If skin irritation or rash occurs: Get medical advice/attention. P337/313, If eye irritation persists: Get medical advice/attention. P362, Take off contaminated clothing and wash before reuse. P391, Collect spillage. P501, Dispose of contents/container to approved disposal site, in accordance with local regulations.
Other hazards
Sensitisers declared on a CLP GERANIOL, LINALYL ACETATE, METHYL CINNAMATE, Hazard Label: METHYL ISOEUGENOL, METHYL SALICYLATE, PHENYLACETALDEHYDE Hydrocarbon Concentration %: 0.000%
2.1 Classification of the substance or mixture
Classification under Regulation (EC) No 1272/2008 Class and category of Skin Corrosion / Irritation Category 2 danger: Eye Damage / Irritation Category 2 Sensitization - Skin Category 1 Hazardous to the Aquatic Environment - Long-term Hazard Category 2 H315, Causes skin irritation. H317, May cause an allergic skin reaction. H319, Causes serious eye irritation. H411, Toxic to aquatic life with long lasting effects. 2.2 Label elements Classification under Regulation (EC) No 1272/2008 Signal word: Warning 12 Hazard statements: H315, Causes skin irritation. H317, May cause an allergic skin reaction. H319, Causes serious eye irritation. H411, Toxic to aquatic life with long lasting effects. Supplemental EUH208, Contains GERANIOL, LINALYL ACETATE, METHYL CINNAMATE, METHYL Information: ISOEUGENOL, METHYL SALICYLATE, PHENYLACETALDEHYDE. May produce an allergic reaction. Precautionary P261, Avoid breathing vapour or dust. statements: P264, Wash hands and other contacted skin thoroughly after handling. P272, Contaminated work clothing should not be allowed out of the workplace. P273, Avoid release to the environment. P280, Wear protective gloves/eye protection/face protection. P302/352, IF ON SKIN: Wash with plenty of soap and water. P305/351/338, IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333/313, If skin irritation or rash occurs: Get medical advice/attention. P337/313, If eye irritation persists: Get medical advice/attention. P362, Take off contaminated clothing and wash before reuse. P391, Collect spillage. P501, Dispose of contents/container to approved disposal site, in accordance with local regulations. Pictograms: 2.3 Other hazards Other hazards: Sensitisers declared on a CLP GERANIOL, LINALYL ACETATE, METHYL CINNAMATE, Hazard Label: METHYL ISOEUGENOL, METHYL SALICYLATE, PHENYLACETALDEHYDE Hydrocarbon Concentration %: 0.000% Section 3. Composition / information on ingredients 3.2 Mixtures Contains: Name Specific Conc. CAS EC REACH Registration % Classification for Limits, M-factors No. (CLP) 1272/2008 and ATEs 12 LINALOOL 78-70-6 201-134-4 01-2119474016-42-xxxx 20-<50% SCI 2-EDI 2-SS 1B; oral: ATE = 2790 H315-H317-H319,- mg/kg bw BENZYL ACETATE 140-11-4 205-399-7 10-<20% EH C3;H412,- oral: ATE = 2490 mg/kg bw HEXYL SALICYLATE 6259-76-3 228-408-6 01-2119638275-36-xxxx 5-<10% SS 1B-EH A1-EH C1; H317-H410,- BENZYL SALICYLATE 118-58-1 204-262-9 5-<10% SS 1B-EH C3;H317- oral: ATE = 2200 H412,- mg/kg bw AMYL CINNAMAL 122-40-7 204-541-5 5-<10% SS 1B-EH C2;H317- oral: ATE = 3730 H411,- mg/kg bw METHYL BETA- 93-04-9 202-213-6 1-<5% EH C2;H411,- NAPHTHYL ETHER 1,3,4,6,7,8- HEXAHYDRO- 4,6,6,7,8,8- 1222-05-5 214-946-9 01-2119488227-29-xxxx 1-<5% EH A1-EH C1;H410,- HEXAMETHYLINDENO [5,6-C]PYRAN CIS-3-HEXENYL 65405-77-8 265-745-8 01-2119987320-37-xxxx 1-<5% EH A1-EH C2;H400- oral: ATE = 2500 SALICYLATE H411,- mg/kg bw TETRAHYDROINDENO 18096-62-3 241-997-4 0.1-<1% REP 2;H361,- oral: ATE = 2500 -DIOXIN mg/kg bw PHENYLETHYL 103-45-7 203-113-5 0.1-<1% EDI 1;H318,- oral: ATE = 2500 ACETATE mg/kg bw LINALYL ACETATE 115-95-7 204-116-4 01-2119454789-19-xxxx 0.1-<1% SCI 2-EDI 2-SS 1B; H315-H317-H319,- ATO 4-EDI 1-SS 1B- METHYL SALICYLATE 119-36-8 204-317-7 0.1-<1% REP 2-EH C3;H302- oral: ATE = 890 mg/kg H317-H318-H361- bw H412,- GERANIOL 106-24-1 203-377-1 01-2119552430-49-xxxx 0.1-<1% SCI 2-EDI 1-SS 1; oral: ATE = 3600 H315-H317-H318,- mg/kg bw METHYL CINNAMATE 103-26-4 203-093-8 0.1-<1% SS 1B;H317,- oral: ATE = 2610 mg/kg bw METHYL ISOEUGENOL 93-16-3 202-224-6 0.1-<1% SS 1B;H317,- oral: ATE = 2500 mg/kg bw dermal: ATE = 5000 PHENYLPROPANOL 122-97-4 204-587-6 0.1-<1% SCI 1B-EDI 1;H314,- mg/kg bw-oral: ATE = 2275 mg/kg bw PHENYLACETALDEHY ATO 4-SCI 1B-EDI 1- dermal: ATE = 2500 DE 122-78-1 204-574-5 0.1-<1% SS 1B-EH C3;H302- mg/kg bw-oral: ATE = H314-H317-H412,- 1550 mg/kg bw Substances with Community workplace exposure limits: Name Specific Conc. CAS EC REACH Registration % Classification for Limits, M-factors No. (CLP) 1272/2008 and ATEs DIETHYL PHTHALATE 84-66-2 201-550-6 01-2119486682-27-xxxx 1-<5% -;-,- Substances that are endocrine disruptors according to Regulation (EU) 2017/2100 or Regulation (EU) 2018/605, greater than 0.1%: Not Applicable Substances that are persistent, bioaccumulative and toxic or very persistent and very bioaccumulative, greater than 0.1%: Not Applicable 12 Section 4. First-aid measures 4.1 Description of first aid measures Inhalation: Remove from exposure site to fresh air, keep at rest, and obtain medical attention. Eye exposure: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Skin exposure: IF ON SKIN: Wash with plenty of soap and water. Ingestion: Rinse mouth with water and obtain medical attention. 4.2 Most important symptoms and effects, both acute and delayed Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. 4.3 Indication of any immediate medical attention and special treatment needed None expected, see Section 4.1 for further information. Section 5: Firefighting measures 5.1 Extinguishing media Suitable media: Carbon dioxide, Dry chemical, Foam. 5.2 Special hazards arising from the substance or mixture In case of fire, may be liberated: Carbon monoxide, Unidentified organic compounds. 5.3 Advice for fire fighters: In case of insufficient ventilation, wear suitable respiratory equipment. Section 6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures: Avoid inhalation. Avoid contact with skin and eyes. See protective measures under Section 7 and 8. 6.2 Environmental precautions: Keep away from drains, surface and ground water, and soil. 6.3 Methods and material for containment and cleaning up: Remove ignition sources. Provide adequate ventilation. Avoid excessive inhalation of vapours. Contain spillage immediately by use of sand or inert powder. Dispose of according to local regulations. 12 6.4 Reference to other sections: Also refer to sections 8 and 13. Section 7. Handling and storage 7.1 Precautions for safe handling: Keep away from heat, sparks, open flames and hot surfaces. - No smoking. Use personal protective equipment as required. Use in accordance with good manufacturing and industrial hygiene practices. Use in areas with adequate ventilation Do not eat, drink or smoke when using this product. 7.2 Conditions for safe storage, including any incompatibilities: Store in a well-ventilated place. Keep container tightly closed. Keep cool. Ground/bond container and receiving equipment. Use explosion-proof electrical, ventilating and lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. 7.3 Specific end use(s): Fragrances: Use in accordance with good manufacturing and industrial hygiene practices. Section 8. Exposure controls/personal protection 8.1 Control parameters Workplace exposure limits: Ingredient CAS EC Description Value UK Long-term exposure limit (8-hour TWA) 5 mg/m³ (mg/m3) DIETHYL PHTHALATE 84-66-2 201-550-6 UK Short-term exposure limit (15-minute) 10 mg/m³ (mg/m3) 8.2 Exposure Controls Eye / Skin Protection Wear protective gloves/eye protection/face protection Respiratory Protection Ensure adequate and ongoing ventilation is maintained in order to prevent build up of excessive vapour and to ensure occupational exposure limits are adhered to. If appropriate, and depending on your patterns and volumes of use, the following engineering controls may be required as additional protective measures: a) Isolate mixing rooms and other areas where this material is used or openly handled. Maintain these areas under negative air pressure relative to the rest of the plant. b) Employ the use of Personal protective equipment - an approved, properly fitted respirator with organic vapour cartridges or canisters and particulate filters. c) Use local exhaust ventilation around open tanks and other open sources of potential exposures in order to avoid excessive inhalation, including places where this material is openly weighed or measured. In addition, use general dilution ventilation of the work area to eliminate or reduce possible worker exposures. d) Use closed systems for transferring and processing this material. Also refer to Sections 2 and 7.