Note: Ingredients listed on restricted chemical lists
EC/CAS
204-465-2/121-33-5
Name of the chemical
4-Hydroxy-3-methoxybenz-aldehyde (40)
Concentration
5-<10%
EC/CAS
203-273-6/105-13-5
Name of the chemical
4-Methoxybenzyl alcohol
Concentration
1-<5%
EC/CAS
203-377-1/106-24-1
Name of the chemical
2,6-Octadien-1-ol, 3,7-dimethyl-, (2E)
Concentration
1-<5%
EC/CAS
201-550-6/84-66-2
Name of the chemical
Diethyl phthalate (DEP),5
Concentration
50-100%
General Information
Version
15
Revision date
2024-05-09
Product name
COFFEE
Product Synonyms
None
1.2.1 Relevant identified uses
Fragrances
Emergency telephone
+44 1926 291009
Icons in SDS
Company Information
company name
Imperial Supply Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
info@craftovator.co.uk
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H317, H319
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Signal word
Warning
Hazard statements
H317, May cause an allergic skin reaction. H319, Causes serious eye irritation.
Additional information
EUH208, Contains 5-METHYL-2-PHENYL-2-HEXENAL. May produce an allergic reaction.
Precautionary statements
P261, Avoid breathing vapour or dust. P264, Wash hands and other contacted skin thoroughly after handling. P272, Contaminated work clothing should not be allowed out of the workplace. P280, Wear protective gloves/eye protection/face protection. P302/352, IF ON SKIN: Wash with plenty of soap and water. P305/351/338, IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333/313, If skin irritation or rash occurs: Get medical advice/attention. P337/313, If eye irritation persists: Get medical advice/attention. P363, Wash contaminated clothing before reuse. P501, Dispose of contents/container to approved disposal site, in accordance with local regulations.
Other hazards
Sensitisers declared on a CLP 5-METHYL-2-PHENYL-2-HEXENAL Hazard Label: Hydrocarbon Concentration %: 0.000%
2.1 Classification of the substance or mixture
Classification under Regulation (EC) No 1272/2008 Class and category of Eye Damage / Irritation Category 2 danger: Sensitization - Skin Category 1 H317, May cause an allergic skin reaction. H319, Causes serious eye irritation. 2.2 Label elements Classification under Regulation (EC) No 1272/2008 Signal word: Warning Hazard statements: H317, May cause an allergic skin reaction. H319, Causes serious eye irritation. 15 Supplemental EUH208, Contains 5-METHYL-2-PHENYL-2-HEXENAL. May produce an allergic reaction. Information: Precautionary P261, Avoid breathing vapour or dust. statements: P264, Wash hands and other contacted skin thoroughly after handling. P272, Contaminated work clothing should not be allowed out of the workplace. P280, Wear protective gloves/eye protection/face protection. P302/352, IF ON SKIN: Wash with plenty of soap and water. P305/351/338, IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333/313, If skin irritation or rash occurs: Get medical advice/attention. P337/313, If eye irritation persists: Get medical advice/attention. P363, Wash contaminated clothing before reuse. P501, Dispose of contents/container to approved disposal site, in accordance with local regulations. Pictograms: 2.3 Other hazards Other hazards: Sensitisers declared on a CLP 5-METHYL-2-PHENYL-2-HEXENAL Hazard Label: Hydrocarbon Concentration %: 0.000% Section 3. Composition / information on ingredients 3.2 Mixtures Contains: Name Specific Conc. CAS EC REACH Registration % Classification for Limits, M-factors No. (CLP) 1272/2008 and ATEs dermal: ATE = 2600 VANILLIN 121-33-5 204-465-2 5-<10% EDI 2;H319,- mg/kg bw-oral: ATE = 3300 mg/kg bw ANISALDEHYDE 123-11-5 204-602-6 1-<5% EH C3;H412,- oral: ATE = 3210 mg/kg bw ANISE ALCOHOL 105-13-5 203-273-6 1-<5% SCI 2-EDI 2-SS 1B; dermal: ATE = 3000 H315-H317-H319,- mg/kg bw GERANIOL 106-24-1 203-377-1 01-2119552430-49-xxxx 1-<5% SCI 2-EDI 1-SS 1; oral: ATE = 3600 H315-H317-H318,- mg/kg bw METHYLCYCLOPENTE 80-71-7 201-303-2 1-<5% ATO 4-SS 1;H302- oral: ATE = 1067 NOLONE H317,- mg/kg bw 5-METHYL-2-PHENYL- 21834-92-4 244-602-3 0.1-<1% SS 1B;H317,- 2-HEXENAL 15 Substances with Community workplace exposure limits: Name Specific Conc. CAS EC REACH Registration % Classification for Limits, M-factors No. (CLP) 1272/2008 and ATEs DIETHYL PHTHALATE 84-66-2 201-550-6 01-2119486682-27-xxxx 50-100% -;-,- Substances that are endocrine disruptors according to Regulation (EU) 2017/2100 or Regulation (EU) 2018/605, greater than 0.1%: Not Applicable Substances that are persistent, bioaccumulative and toxic or very persistent and very bioaccumulative, greater than 0.1%: Not Applicable Section 4. First-aid measures 4.1 Description of first aid measures Inhalation: Remove from exposure site to fresh air, keep at rest, and obtain medical attention. Eye exposure: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Skin exposure: IF ON SKIN: Wash with plenty of soap and water. Ingestion: Rinse mouth with water and obtain medical attention. 4.2 Most important symptoms and effects, both acute and delayed May cause an allergic skin reaction. Causes serious eye irritation. 4.3 Indication of any immediate medical attention and special treatment needed None expected, see Section 4.1 for further information. Section 5: Firefighting measures 5.1 Extinguishing media Suitable media: Carbon dioxide, Dry chemical, Foam. 5.2 Special hazards arising from the substance or mixture In case of fire, may be liberated: Carbon monoxide, Unidentified organic compounds. 5.3 Advice for fire fighters: In case of insufficient ventilation, wear suitable respiratory equipment. 15 Section 6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures: Avoid inhalation. Avoid contact with skin and eyes. See protective measures under Section 7 and 8. 6.2 Environmental precautions: Keep away from drains, surface and ground water, and soil. 6.3 Methods and material for containment and cleaning up: Remove ignition sources. Provide adequate ventilation. Avoid excessive inhalation of vapours. Contain spillage immediately by use of sand or inert powder. Dispose of according to local regulations. 6.4 Reference to other sections: Also refer to sections 8 and 13. Section 7. Handling and storage 7.1 Precautions for safe handling: Keep away from heat, sparks, open flames and hot surfaces. - No smoking. Use personal protective equipment as required. Use in accordance with good manufacturing and industrial hygiene practices. Use in areas with adequate ventilation Do not eat, drink or smoke when using this product. 7.2 Conditions for safe storage, including any incompatibilities: Store in a well-ventilated place. Keep container tightly closed. Keep cool. Ground/bond container and receiving equipment. Use explosion-proof electrical, ventilating and lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. 7.3 Specific end use(s): Fragrances: Use in accordance with good manufacturing and industrial hygiene practices. Section 8. Exposure controls/personal protection 8.1 Control parameters Workplace exposure limits: Ingredient CAS EC Description Value UK Long-term exposure limit (8-hour TWA) 5 mg/m³ (mg/m3) DIETHYL PHTHALATE 84-66-2 201-550-6 UK Short-term exposure limit (15-minute) 10 mg/m³ (mg/m3) 15 8.2 Exposure Controls Eye / Skin Protection Wear protective gloves/eye protection/face protection Respiratory Protection Ensure adequate and ongoing ventilation is maintained in order to prevent build up of excessive vapour and to ensure occupational exposure limits are adhered to. If appropriate, and depending on your patterns and volumes of use, the following engineering controls may be required as additional protective measures: a) Isolate mixing rooms and other areas where this material is used or openly handled. Maintain these areas under negative air pressure relative to the rest of the plant. b) Employ the use of Personal protective equipment - an approved, properly fitted respirator with organic vapour cartridges or canisters and particulate filters. c) Use local exhaust ventilation around open tanks and other open sources of potential exposures in order to avoid excessive inhalation, including places where this material is openly weighed or measured. In addition, use general dilution ventilation of the work area to eliminate or reduce possible worker exposures. d) Use closed systems for transferring and processing this material. Also refer to Sections 2 and 7. Section 9. Physical and chemical properties 9.1 Information on basic physical and chemical properties Physical State/Colour: Clear colourless to pale yellow liquid Odour: Not determined Odour threshold: Not determined Melting point / freezing point: Not determined Boiling point or initial boiling point and boiling Not determined range: Flammability: Not determined Lower and upper explosion limit: Not determined Flash point: > 100 °C Auto-ignition temperature: Not determined Decomposition temperature: Not relevant pH: Not determined Kinematic viscosity: Not determined Solubility: Not determined Partition coefficient: n-octanol/water (log Not determined value): Vapour pressure: 0.00809831 mmHg Density and/or relative density: 1.1140 Relative vapour density: Not determined Particle characteristics: Not determined 9.2 Other information: None available 15 Section 10. Stability and reactivity 10.1 Reactivity: Presents no significant reactivity hazard, by itself or in contact with water. 10.2 Chemical stability: Good stability under normal storage conditions. 10.3 Possibility of hazardous reactions: Not expected under normal conditions of use. 10.4 Conditions to avoid: Avoid extreme heat. 10.5 Incompatible materials: Avoid contact with strong acids, alkalis or oxidising agents. 10.6 Hazardous decomposition products: Not expected. Section 11. Toxicological information 11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008 This mixture has not been tested as a whole for health effects. The health effects have been calculated using the methods outlined in Regulation (EC) No 1272/2008 (CLP). Acute Toxicity: Based on available data the classification criteria are not met. Acute Toxicity Oral >5000 Acute Toxicity Dermal >5000 Acute Toxicity Inhalation Not Available Skin corrosion/irritation: Based on available data the classification criteria are not met. Serious eye damage/irritation: Eye Damage / Irritation Category 2 Respiratory or skin sensitisation: Sensitization - Skin Category 1 Germ cell mutagenicity: Based on available data the classification criteria are not met. Carcinogenicity: Based on available data the classification criteria are not met. Reproductive toxicity: Based on available data the classification criteria are not met. STOT-single exposure: Based on available data the classification criteria are not met. STOT-repeated exposure: Based on available data the classification criteria are not met. Aspiration hazard: Based on available data the classification criteria are not met. Information about hazardous ingredients in the mixture Ingredient CAS EC LD50/ATE Oral LD50/ATE LC50/ATE LC50 Dermal Inhalation Route METHYLCYCLOPENT Not 80-71-7 201-303-2 1067