CHOCOLATE FRAGRANCE

Hazard statements (CLP)

H226, H412

Code

Statements

H226

Flammable liquid and vapour

SECTION 2: Hazards identification

Signal word

Warning

Hazard statements

H226, Flammable liquid and vapour. H412, Harmful to aquatic life with long lasting effects.

Additional information

EUH208, Contains 5-METHYL-2-PHENYL-2-HEXENAL, HELIOTROPINE, ISOPENTANAL, PHENYLACETALDEHYDE. May produce an allergic reaction.

Precautionary statements

P210, Keep away from heat, sparks, open flames and hot surfaces. - No smoking. P233, Keep container tightly closed. P240, Ground/bond container and receiving equipment. P241, Use explosion-proof electrical, ventilating and lighting equipment. P242, Use only non-sparking tools. P243, Take precautionary measures against static discharge. P273, Avoid release to the environment. P280, Wear protective gloves/eye protection/face protection. P303/361/353, IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. P370/378, In case of fire: Use carbon dioxide, dry chemical, foam for extinction. P403/235, Store in a well-ventilated place. Keep cool. P501, Dispose of contents/container to approved disposal site, in accordance with local regulations.

Other hazards

Sensitisers declared on a CLP 5-METHYL-2-PHENYL-2-HEXENAL, HELIOTROPINE, Hazard Label: ISOPENTANAL, PHENYLACETALDEHYDE Hydrocarbon Concentration %: 0.000%

2.1 Classification of the substance or mixture

Classification under Regulation (EC) No 1272/2008 Class and category of Flammable Liquid, Hazard Category 3 danger: Hazardous to the Aquatic Environment - Long-term Hazard Category 3 H226, Flammable liquid and vapour. H412, Harmful to aquatic life with long lasting effects. 2.2 Label elements Classification under Regulation (EC) No 1272/2008 Signal word: Warning Hazard statements: H226, Flammable liquid and vapour. H412, Harmful to aquatic life with long lasting effects. Supplemental EUH208, Contains 5-METHYL-2-PHENYL-2-HEXENAL, HELIOTROPINE, ISOPENTANAL, Information: PHENYLACETALDEHYDE. May produce an allergic reaction. 16 Precautionary P210, Keep away from heat, sparks, open flames and hot surfaces. - No smoking. statements: P233, Keep container tightly closed. P240, Ground/bond container and receiving equipment. P241, Use explosion-proof electrical, ventilating and lighting equipment. P242, Use only non-sparking tools. P243, Take precautionary measures against static discharge. P273, Avoid release to the environment. P280, Wear protective gloves/eye protection/face protection. P303/361/353, IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. P370/378, In case of fire: Use carbon dioxide, dry chemical, foam for extinction. P403/235, Store in a well-ventilated place. Keep cool. P501, Dispose of contents/container to approved disposal site, in accordance with local regulations. Pictograms: 2.3 Other hazards Other hazards: Sensitisers declared on a CLP 5-METHYL-2-PHENYL-2-HEXENAL, HELIOTROPINE, Hazard Label: ISOPENTANAL, PHENYLACETALDEHYDE Hydrocarbon Concentration %: 0.000% Section 3. Composition / information on ingredients 3.2 Mixtures Contains: Name Specific Conc. CAS EC REACH Registration % Classification for Limits, M-factors No. (CLP) 1272/2008 and ATEs ISOAMYL 102-19-2 203-012-6 01-2120118106-69-xxxx 10-<20% EH C2;H411,- PHENYLACETATE dermal: ATE = 2600 VANILLIN 121-33-5 204-465-2 5-<10% EDI 2;H319,- mg/kg bw-oral: ATE = 3300 mg/kg bw ETHYL LAEVULINATE 539-88-8 208-728-2 1-<5% SCI 2;H315,- ETHYL 4940-11-8 225-582-5 1-<5% ATO 4;H302,- oral: ATE = 1200 HYDROXYPYRONE mg/kg bw HELIOTROPINE 120-57-0 204-409-7 0.1-<1% SS 1B;H317,- oral: ATE = 2700 mg/kg bw 16 FL 2-EDI 2-SS 1B- ISOPENTANAL 590-86-3 209-691-5 0.1-<1% STO-SE 3(RI)-EH C2; dermal: ATE = 2534 H225-H317-H319- mg/kg bw H335-H411,- 5-METHYL-2-PHENYL- 21834-92-4 244-602-3 0.1-<1% SS 1B;H317,- 2-HEXENAL PHENYLACETALDEHY ATO 4-SCI 1B-EDI 1- dermal: ATE = 2500 DE 122-78-1 204-574-5 0.1-<1% SS 1B-EH C3;H302- mg/kg bw-oral: ATE = H314-H317-H412,- 1550 mg/kg bw Substances with Community workplace exposure limits: Name Specific Conc. CAS EC REACH Registration % Classification for Limits, M-factors No. (CLP) 1272/2008 and ATEs DIETHYL PHTHALATE 84-66-2 201-550-6 01-2119486682-27-xxxx 50-100% -;-,- Substances that are endocrine disruptors according to Regulation (EU) 2017/2100 or Regulation (EU) 2018/605, greater than 0.1%: Not Applicable Substances that are persistent, bioaccumulative and toxic or very persistent and very bioaccumulative, greater than 0.1%: Not Applicable Section 4. First-aid measures 4.1 Description of first aid measures Inhalation: Remove from exposure site to fresh air, keep at rest, and obtain medical attention. Eye exposure: Flush immediately with water for at least 15 minutes. Contact physician if symptoms persist. Skin exposure: IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Ingestion: Rinse mouth with water and obtain medical attention. 4.2 Most important symptoms and effects, both acute and delayed None expected, see Section 4.1 for further information. 4.3 Indication of any immediate medical attention and special treatment needed None expected, see Section 4.1 for further information. Section 5: Firefighting measures 5.1 Extinguishing media Suitable media: Carbon dioxide, Dry chemical, Foam. 5.2 Special hazards arising from the substance or mixture In case of fire, may be liberated: Carbon monoxide, Unidentified organic compounds. 16 5.3 Advice for fire fighters: In case of insufficient ventilation, wear suitable respiratory equipment. Section 6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures: Avoid inhalation. Avoid contact with skin and eyes. See protective measures under Section 7 and 8. 6.2 Environmental precautions: Keep away from drains, surface and ground water, and soil. 6.3 Methods and material for containment and cleaning up: Remove ignition sources. Provide adequate ventilation. Avoid excessive inhalation of vapours. Contain spillage immediately by use of sand or inert powder. Dispose of according to local regulations. 6.4 Reference to other sections: Also refer to sections 8 and 13. Section 7. Handling and storage 7.1 Precautions for safe handling: Keep away from heat, sparks, open flames and hot surfaces. - No smoking. 7.2 Conditions for safe storage, including any incompatibilities: Store in a well-ventilated place. Keep container tightly closed. Keep cool. Ground/bond container and receiving equipment. Use explosion-proof electrical, ventilating and lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. 7.3 Specific end use(s): Fragrances: Use in accordance with good manufacturing and industrial hygiene practices. Section 8. Exposure controls/personal protection 8.1 Control parameters Workplace exposure limits: Ingredient CAS EC Description Value UK Long-term exposure limit (8-hour TWA) 5 mg/m³ (mg/m3) DIETHYL PHTHALATE 84-66-2 201-550-6 UK Short-term exposure limit (15-minute) 10 mg/m³ (mg/m3) 16 8.2 Exposure Controls Eye / Skin Protection Wear protective gloves/eye protection/face protection Respiratory Protection Ensure adequate and ongoing ventilation is maintained in order to prevent build up of excessive vapour and to ensure occupational exposure limits are adhered to. If appropriate, and depending on your patterns and volumes of use, the following engineering controls may be required as additional protective measures: a) Isolate mixing rooms and other areas where this material is used or openly handled. Maintain these areas under negative air pressure relative to the rest of the plant. b) Employ the use of Personal protective equipment - an approved, properly fitted respirator with organic vapour cartridges or canisters and particulate filters. c) Use local exhaust ventilation around open tanks and other open sources of potential exposures in order to avoid excessive inhalation, including places where this material is openly weighed or measured. In addition, use general dilution ventilation of the work area to eliminate or reduce possible worker exposures. d) Use closed systems for transferring and processing this material. Also refer to Sections 2 and 7. Section 9. Physical and chemical properties 9.1 Information on basic physical and chemical properties Physical State/Colour: Clear pale yellow to pale brown liquid Odour: Not determined Odour threshold: Not determined Melting point / freezing point: Not determined Boiling point or initial boiling point and boiling Not determined range: Flammability: Not determined Lower and upper explosion limit: Not determined Flash point: 53 °C Auto-ignition temperature: Not determined Decomposition temperature: Not relevant pH: Not determined Kinematic viscosity: Not determined Solubility: Not determined Partition coefficient: n-octanol/water (log Not determined value): Vapour pressure: 1.07875557 mmHg Density and/or relative density: 1.0970 - 1.1010 Relative vapour density: Not determined Particle characteristics: Not determined 9.2 Other information: None available 16 Section 10. Stability and reactivity 10.1 Reactivity: Presents no significant reactivity hazard, by itself or in contact with water. 10.2 Chemical stability: Good stability under normal storage conditions. 10.3 Possibility of hazardous reactions: Not expected under normal conditions of use. 10.4 Conditions to avoid: Avoid extreme heat. 10.5 Incompatible materials: Avoid contact with strong acids, alkalis or oxidising agents. 10.6 Hazardous decomposition products: Not expected. Section 11. Toxicological information 11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008 This mixture has not been tested as a whole for health effects. The health effects have been calculated using the methods outlined in Regulation (EC) No 1272/2008 (CLP). This material does not meet the criteria for classification for health hazards under Regulation (EC) No 1272/2008. Acute Toxicity: Based on available data the classification criteria are not met. Acute Toxicity Oral >5000 Acute Toxicity Dermal >5000 Acute Toxicity Inhalation Not Available Skin corrosion/irritation: Based on available data the classification criteria are not met. Serious eye damage/irritation: Based on available data the classification criteria are not met. Respiratory or skin sensitisation: Based on available data the classification criteria are not met. Germ cell mutagenicity: Based on available data the classification criteria are not met. Carcinogenicity: Based on available data the classification criteria are not met. Reproductive toxicity: Based on available data the classification criteria are not met. STOT-single exposure: Based on available data the classification criteria are not met. STOT-repeated exposure: Based on available data the classification criteria are not met. Aspiration hazard: Based on available data the classification criteria are not met.