Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-37-1
Name of the chemical
Argon Ar
Concentration
N/A
EC/CAS
7440-59-7
Name of the chemical
Helium He
Concentration
N/A
EC/CAS
231-147-0
Name of the chemical
Argon Ar
Concentration
N/A
EC/CAS
231-168-5
Name of the chemical
Helium He
Concentration
N/A
General Information
Revision date
2018-11-28
Product name
ITS, SRA, IHC, IKAB, S4S2 utilizing ACH2 or ACH-2 EV Hybrid Inflator
1.2.1 Relevant identified uses
Protection units. Each system contains either an ACH 2 or ACH 2 EV Hybrid Inflators that consists of an electric initiator, lead wires, gas, and potentially a solid propellant !
Icons in SDS
Company Information
company name
IMMI Ltd
Section 2
SECTION 2: Hazards identification
Emergency Overview: The tamper-resistant, sealed metal container poses no risk of chemical exposure before deployment. If the container vessel is incinerated, broken, drilled into, electric current is connected to the lead wires, or if installed improperly, a physical hazard may exist during deployment. ACH-2 inflators contain a high pressure mix of Helium and Argon gas. ACH-2 EV inflators contain a high pressure mix of Helium and Argon gas and a small amount of pyrotechnic material, MIP-1191. DO NOT cut, drill, braze, solder, weld, strike, or probe the steel container. Upon activation, the combustion byproducts of the pyrotechnic materials are instantaneously and in negligible quantities. Avoid breathing or ingestion products of combustion. If exposed to combustion products, move to fresh air. Seek medical attention if necessary. Overexposure due to inhalation of combustion products could irritate respiratory system or aggravate existing respiratory condition. Avoid contact of combustion residue with skin; if necessary, flush with water. NOTE: If inflator is ruptured and igniter material is present, or if individuals are exposed to repeated deployments as experienced in a testing situation without safe and adequate engineering controls or PPE, see Autoliv MSDS #042, Airbag Inflator Igniter Generant (MIP-1191) for additional information. None expected when used as intended. Effluent gases from multiple deployments in testing situations may cause skin, eye, respiratory system, or mucus membrane irritation. Effluent gases
Potential health effects
in these situations must be effectively controlled through engineering systems designed and tested to remove applicable contaminants or PPE that will accomplish the same effect.
2.1 Classification of the substance or mixture
Class 9 – Miscellaneous Hazardous Materials
Hazard pictograms
Human Health Effects and Symptoms of Overexposure Inhalation Potential to irritate respiratory system or aggravate existing respiratory condition. Skin Contact Potential skin irritant. Eyes Potential eye irritant. Ingestion Not available. ! Carcinogenicity Not available.
Medical Conditions Generally Aggravated by Exposure
Respiratory conditions. Exposure Target Organs Not available.
Environmental effects
Not available. !
