Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
N/A
EC/CAS
9004-70-0
Name of the chemical
Nitrocellulose
Concentration
N/A
EC/CAS
122-39-4
Name of the chemical
Diphenylamine
Concentration
N/A
EC/CAS
7440-44-0
Name of the chemical
Carbon black
Concentration
N/A
EC/CAS
231-176-9
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
N/A
EC/CAS
204-539-4
Name of the chemical
Diphenylamine, when used as a fragrance ingredient
Concentration
N/A
EC/CAS
231-153-3
Name of the chemical
Carbon black
Concentration
N/A
General Information
Revision date
2018-11-28
Product name
IGP Buckle Pretensioner and IBP Buckle Pretensioner
1.2.1 Relevant identified uses
removing slack from the seat belt. Each pretensioner assembly includes a buckle, cable,
Icons in SDS
Company Information
company name
IMMI Ltd
Section 2
SECTION 2: Hazards identification
Emergency Overview: The tamper-resistant, sealed metal container poses no risk of chemical exposure before deployment. If the container vessel is incinerated, broken, drilled into, electric current is connected to the lead wires, or if installed improperly, a physical hazard may exist during deployment. The sealed device, a micro-gas generator (MGG), contains a mixture of proprietary pyrotechnic materials. DO NOT cut, drill, braze, solder, weld, strike, or probe the steel container. Do not drop, the buckle pretensioner may be damaged, exposing the MGGs and/or propellant. Do not attempt to service or repair. Intact systems pose no health hazard when handled in a way that prevents deployment of the system or damage to the system. Upon Activation, the seat belt buckle and cable will move rapidly, possibly causing mechanical damage or injury. Previously deployed systems present no health hazard. Upon activation, the combustion byproducts of the pyrotechnic materials are instantaneous and in negligible quantities. Avoid breathing or ingesting products of combustion. If exposed to combustion products, move to fresh air. Seek medical attention if necessary. Overexposure due to inhalation of combustion products could irritate respiratory system or aggravate existing respiratory condition. Avoid contact of combustion residue with skin; if necessary, flush with water. None expected when used as intended. Effluent gases from multiple deployments in testing situations may cause skin, eye, respiratory system, or mucus membrane irritation. Effluent gases
Potential health effects
in these situations must be effectively controlled through engineering systems designed and tested to remove applicable contaminants or PPE that will accomplish the same effect.
2.1 Classification of the substance or mixture
Class 9 – Miscellaneous Hazardous Materials
Hazard pictograms
Human Health Effects and Symptoms of Overexposure Inhalation Potential to irritate respiratory system or aggravate existing respiratory condition. Skin Contact Potential skin irritant. Eyes Potential eye irritant. Ingestion Not available. Carcinogenicity Not available.
Medical Conditions Generally Aggravated by Exposure
Exposure Respiratory conditions. Target Organs Not available.
Environmental effects
Not available.