Note: Ingredients listed on restricted chemical lists
EC/CAS
237-772-5/13983-17-0
Name of the chemical
wollastonite
Concentration
100%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
General Information
Version
5
Revision date
2021-07-22
Product name
Wollastonite (USA) Surface treated
Product name
Wollastonite (USA) Surface treated
Identification on the label/Trade name
10 AS WOLLASTOCOAT , 10 ES WOLLASTOCOAT , 400 ES WOLLASTOCOAT , 400 WOLLASTOCOAT , CODE J, NYGLOS 4W, NYGLOS 8, NYGLOS 12, RRIMGLOS II
Chemical name
Wollastonite - Calcium Silicate with surface treatment
REACH No
notes
1.2.1 Relevant identified uses
A functional additive
supplier name
Imerys Talc Europe
Manufacturer Name
IMERYS Wollastonite USA, LLC
Emergency telephone
1 703 527 3887
Icons in SDS
Company Information
company name
IMERYS Wollastonite USA, LLC
e-mail address of the competent person responsible for the Safety Data Sheet
SDS.expert@imerys.com
Section 2
SECTION 2: Hazards identification
OSHA Classification of the substance or mixture Classification (EC 1272/2008)
Physical hazards
Not Classified
Health hazards
Not Classified
Environmental hazards
Not Classified Human health This product does not meet the criteria for classification as hazardous as defined in the
Hazard statements
NC Not Classified
Other hazards
This substance is not classified Others as PBT or vPvB according to current EU criteria. No other hazards identified
2.1 Classification of the substance or mixture
Classification (EC 1272/2008) Physical hazards Not Classified Health hazards Not Classified Environmental hazards Not Classified Human health This product does not meet the criteria for classification as hazardous as defined in the Regulation EC 1272/2008. Depending on the type of handling and use (e.g. grinding, drying), airborne respirable crystalline silica may be generated. Prolonged and/or massive inhalation of respirable crystalline silica dust may cause lung fibrosis, commonly referred to as silicosis. Principal symptoms of silicosis are cough and breathlessness. Occupational exposure to respirable crystalline silica dust should be monitored and controlled. Handling wollastonite can create dust. Long-term exposure to high concentrations of any type or size of dust can cause irritation and be uncomfortable or harmful if the body’s natural defense mechanisms are overwhelmed or incapacitated. As a general rule, control airborne dust and avoid creating or breathing dusts. Wollastonite is a naturally occurring mineral which can contain impurities in its natural form. Imerys specifically tests its wollastonite product for the presence of asbestos. Those tests ensure the absence of asbestos at levels above 60 ppm (0.006% mass ratio) with 99% confidence. Imerys continually strives to improve its testing methods to ensure the highest purity of its products. The National Toxicology Program (“NTP”), the International Agency for Research on Cancer (“IARC”), and the Occupational Safety and Health Administration (“OSHA”) have all identified asbestos as a human carcinogen. Inhalation of asbestos dust may be irritating, leading to symptoms such as a cough and chest pain. Chronic inhalation exposure may cause (i) asbestosis, interstitial fibrosis of the lung tissue, which may lead to death due to respiratory or cardiac failure; (ii) pleural effusion; (iii) pleural and peritoneal mesothelioma; (iv) bronchogenic carcinoma; (v) lung cancer; (vi) cancer of the gastrointestinal tract and larynx; and (vii) other secondary lung or respiratory infections. There also are potential health effects of non- inhalation exposure to asbestos. Environmental The product is not expected to be hazardous to the environment. Physicochemical This product has been surface treated. During handling, particularly when air conveying, the product may exhibit charge accumulation properties