Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
N/A
EC/CAS
238-878-4
Name of the chemical
Quarz-A-Staub (s. u. TRGS 906)
Concentration
N/A
EC/CAS
238-877-9
Name of the chemical
Talc: Hydrated magnesium silicate
Concentration
N/A
General Information
Revision date
2017-09-06
Product name
LUZENAC E7 V432
Substance name
Talc
Product Synonyms
Talcum, steatite, soapstone, French chalk, hydrous magnesium silicate
Chemical name
Mg3Si4O10(OH)2
CAS No.
14807-96-6
1.2.1 Relevant identified uses
Functional mineral for use in industrial applications
1.2.2. Uses advised against
None
Emergency telephone
+1 303 623 5716
Icons in SDS
Company Information
company name
Imerys Talc Austria GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
msds.talceurope@imerys.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H317, H319
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
2.1 Classification of the substance or mixture
Regulation EC 1272/2008: Skin irritation Category 2 H315: Causes skin irritation Skin sensitisation Category 1 H317: May cause an allergic skin reaction Eye irritation Category 2 H319: Causes serious eye irritation Repeated and prolonged exposure to large amounts of talc dust can cause lung injury (pneumoconiosis). Risk of injury is dependent on the duration and level of exposure. Depending on the type of handling and use (e.g. grinding, drying, etc), airborne respirable crystalline silica (quartz - cristobalite) may be generated. Prolonged and/or massive inhalation of respirable crystalline silica dust may cause lung fibrosis, commonly referred to as silicosis. Principal symptoms of silicosis are cough and breathlessness. Occupational exposure to respirable crystalline silica should be monitored and controlled. These products should be handled with care to avoid dust generation.
Signal word
Warning
Hazard statements
H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation
Prevention
P261 - Avoid breathing dust/fume/gas/mist/vapours/ spray. P264 - Wash skin thoroughly after handling. P272 - Contaminated work clothing should not be allowed out of the workplace. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P302 + P352 – If on skin: Wash with plenty of water P332 + P313 - If skin irritation occurs: Get medical advice/attention. P362 + P364 - Take off contaminated clothing and wash it before reuse.
Response
P333 + P313 - If skin irritation or rash occurs: Get medical advice/attention. P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313 - If eye irritation persists: Get medical advice/attention.
2.3 Other hazards
This product is an inorganic substance and does not meet the criteria for PBT or vPvB in accordance with Annex XIII of REACH.
