Note: Ingredients listed on restricted chemical lists
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
EC/CAS
238-878-4
Name of the chemical
Quarz-A-Staub (s. u. TRGS 906)
Concentration
N/A
General Information
Revision date
2014-09-09
Product name
PORCELAINE DE CALIBRAGE PT010B - PT010B
Icons in SDS
Company Information
company name
IMERYS TABLEWARE FRANCE
e-mail address of the competent person responsible for the Safety Data Sheet
tableware@imerys.com
Section 2
2.1 Classification of the substance or mixture
In compliance with EC regulation No. 1272/2008 and its amendments. This mixture does not present a physical hazard. Refer to the recommendations regarding the other products present on the site. This mixture does not present a health hazard with the exception of possible occupational exposure thresholds (see paragraphs 3 and 8). This mixture does not present an environmental hazard. No known or foreseeable environmental damage under standard conditions of use. In compliance with directives 67/548/EEC, 1999/45/EC and their amendments. This mixture does not present a physical hazard. Refer to the recommendations regarding the other products present on the site. This mixture does not present a health hazard with the exception of possible occupational exposure thresholds (see paragraphs 3 and 8). This mixture does not present an environmental hazard. No known or foreseeable environmental damage under standard conditions of use.
2.2 Label elements
In compliance with EC regulation No. 1272/2008 and its amendments. No labelling requirements for this mixture.
2.3 Other hazards
The mixture does not contain any substances classified as 'Substances of Very High Concern' (SVHC) by the European CHemical s Agency (ECHA) under article 57 of REACH: http://echa.europa.eu/fr/candidate-list-table The mixture satisfies neither the PBT nor the vPvB criteria for mixtures in accordance with annexe XIII of the REACH regulations EC 1907/2006. This product should be handled with care to avoid dust generation. After drying, grain size of this product gives potential for generation of airbone breathable crystalline silica dust during handling and use. Prolonged inhalation of breathable dust may cause lung fibrosisis. Principal symptoms of silicosis are cough and breathlessness. Occupational exposure to respirable crystalline silica dust should be monitored and controlled. This product is an inorganic substance and does not meet the criteria for PBT or vPvB in accordance with Annex XIII of REACH.
