Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (see also specific isomers)
Concentration
N/A
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
N/A
General Information
Revision date
2018-10-11
Product name
510C
1.2.1 Relevant identified uses
A single component moisture cure urethane, clear, for wood, concrete or steel. FOR INDOOR USE ONLY
Manufacturer Name
IMCO TECHNOLOGIES
Emergency telephone
613-996-6666 or *666 CANUTEC
Icons in SDS
Company Information
company name
IMCO TECHNOLOGIES
Section 2
Principle Routes of Exposure
Eye contact, Ingestion, Inhalation, Skin contact. CARCINOGENIC STATUS Not considered to be carcinogenic. TARGET ORGANS Eye, Skin, and respiratory tract.
Potential health effects
EYE Liquid, mist or vapor will cause irritation. Can cause tearing, reddening and swelling. If left untreated, corneal damage can occur and injury is slow to heal. Damage is usually reversible and not permanent. INGESTION Causes irritation and burning of the mucous membranes of the gastrointestinal tract. Symptoms can include sore throat, abdominal pain, nausea, vomiting and diarrhea. Inhalation of vapors/mists at concentration above the exposure limits, can irritate (Burning sensation) the mucous INHALATION membranes in the respiratory tract. Extensive exposures to concentrations of MDI well above the TLV could lead to bronchitis, bronchial spasms and pulmonary edema. These effects are usually reversible. Chemical or hypersensitive pneumonitis, with flu-like symptoms has also been reported. NFPA HMIS 5-MINIMAL; 4-SLIGHT; 3-MODERATE; 2-HIGH; 1-EXTREME
Health Effects - Skin
Can cause localized irritation as well as discoloration.
