Note: Ingredients listed on restricted chemical lists
EC/CAS
204-658-1/123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
16,5≤x<18 7≤x<8
EC/CAS
905-588-0/822-06-0
Name of the chemical
Hexamethylene diisocyanate
Concentration
0,2≤x<0,25
General Information
Revision date
2021-02-18
Product name
MAX - NEW LIGHT (PARTE B)
Product name
MAX - NEW LIGHT (PARTE B)
Identification on the label/Trade name
ILPA ADESIVI SRL
1.2.1 Relevant identified uses
Hardener for acrylic clearcoat low VOC. Professional use only
1.2.2. Uses advised against
none in particular Uses related to the substances present
Emergency telephone
39 0808974667, +44 151 9513317
Icons in SDS
Company Information
company name
ILPA ADESIVI SRL
e-mail address of the competent person responsible for the Safety Data Sheet
laboratorio@ilpa.it
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H226, H317, H331, H335, H336
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
Hazard labelling pursuant to EC Regulation 1272/2008 (CLP) and subsequent amendments and supplements. Classification of the substance or mixture
Signal word
Danger
Hazard statements
H226 Flammable liquid and vapour. H331 Toxic if inhaled. H335 May cause respiratory irritation. H317 May cause an allergic skin reaction. H336 May cause drowsiness or dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. EUH204 Contains isocyanates. May produce an allergic reaction.
Precautionary statements
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261 Avoid breathing dust / fume / gas / mist / vapours / spray. P280 Wear protective gloves / eye protection / face protection. P311 Call a POISON CENTER / doctor in case of malaise P370+P378 In case of fire: useuse carbon dioxide, foam, chemical powder to extinguish. P403+P233 Store in a well-ventilated place. Keep container tightly closed.
Contains
ALIPHATIC POLYISOCYANATE 2-METHOXY-1-METHYLETHYL ACETATE HEXAMETHYLEN-1,6-DIISOCYANATE N-BUTYL ACETATE As from 24 August 2023 adequate training is required before industrial or professional use. VOC (Directive 2004/42/EC) Topcoat - base coatings - clear coating. VOC given in g/litre of product in a ready-to-use condition 416,00 Limit value: 420,00
2.3 Other hazards
On the basis of available data, the product does not contain any PBT or vPvB in percentage ≥ than 0,1%.
2.1 Classification of the substance or mixture
The product is classified as hazardous pursuant to the provisions set forth in (EC) Regulation 1272/2008 (CLP) (and subsequent amendments and supplements). The product thus requires a safety datasheet that complies with the provisions of (EU) Regulation 2015/830. Any additional information concerning the risks for health and/or the environment are given in sections 11 and 12 of this sheet. Hazard classification and indication: Flammable liquid, category 3 H226 Flammable liquid and vapour. Acute toxicity, category 3 H331 Toxic if inhaled. Specific target organ toxicity - single exposure, category 3 H335 May cause respiratory irritation. Skin sensitization, category 1 H317 May cause an allergic skin reaction. Specific target organ toxicity - single exposure, category 3 H336 May cause drowsiness or dizziness.
