Note: Ingredients listed on restricted chemical lists
EC/CAS
212-782-2/868-77-9
Name of the chemical
2-hydroxyethyl methacrylate
Concentration
25-50
EC/CAS
276-957-5/72869-86-4
Name of the chemical
11,14-Dioxa-2,9-diazaheptadec-16-enoic Acid, 4,4,6,16-tetramethyl-10,15-dioxo, 2-[(2-methyl-1-oxo-2-propenyl)oxy]ethyl ester (31)
Concentration
20-40
EC/CAS
423-340-5/162881-26-7
Name of the chemical
Phenyl bis(2,4,6-trimethylbenzoyl)-phosphine oxide
Concentration
1 - < 5
EC/CAS
204-881-4/128-37-0
Name of the chemical
2,6-di-tert-butyl-p-cresol
Concentration
0.1- <0.25
EC/CAS
201-204-4/79-41-4
Name of the chemical
methacrylic acid
Concentration
0.1-<1
EC/CAS
202-617-2/97-90-5
Name of the chemical
methacrylic acid, diester with ethyleneglycol
Concentration
0.1-<1
EC/CAS
9002-84-0
Name of the chemical
Polytetrafluoroethylene
Concentration
0-50
General Information
Revision date
2022-04-10
Product name
iglidur i3000-PR
1.2.1 Relevant identified uses
of material or mixture and uses advised against
1.2.2. Uses advised against
direct contact with foodstuff 1.3 Details on supplier who provides the Safety Data Sheet
Emergency telephone
+49 551/19240
Icons in SDS
Company Information
company name
igus GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
info@igus.de
GHS Information
Signal word
Caution
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H411
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
Signal word
Caution Danger warning H315 – Causes skin irritation H317 – May cause an allergic skin reaction. H319 – Causes serious eye irritation. H411 – Toxic to aquatic life with long lasting effects. Safety Notes on Prevention P273 Avoid release to the environment. P280 Wear protective gloves. Safety Notes on Reaction P333+P313 Skin irritation or skin rash: Seek medical advice / medical attention. P337+P313 Seek medical advice / medical attention if eye irritation persists. P302+P352 Wash with plenty of water and soap in case of skin contact.
Contains
2-hydroxyethyl methacrylate 7,7,9(or 7,9,9)-trimethyl-4,13-dioxo-3,14-dioxa-5,12-diazahexadecane-1,16-diyl bismethacrylate Phenyl-bis(2,4,6-trimethylbenzoyl)-phosphine oxide Methacrylic acid, 2-(2-hydroxyethoxy)ethyl ester Glycerol, propoxylated, esters with acrylic acid 1-6.5PO Reaction mass of pentamethyl-4-piperidyl sebacate Ethylene dimethacrylate Additives
2.3 Other hazards
No special hazards are known, provided that regulations/notes on proper storage and handling are observed. In case of secondary processing of the product, appropriate prevention measures need to be taken. If dusts, fumes or mists occur during processing, use appropriate ventilation to keep exposure to air pollutants below limit values. Dust may cause mechanical irritations. In case of unintended release, remove mechanically in order to prevent the risk of slipping or tripping. Keep away from open fire since the product is combustible. The thermal decomposition products of this polymer may cause polymer fume fever with symptoms similar to those of influenza in humans, particularly after smoking contaminated tobacco products. Does not meet the criteria “persistent, bioaccumulating, toxic” (PBT), “very persistent, very bio- accumulating” (vPvB). The following substances are present at concentrations of ≥0.1% and meet the PBT/vPvB criteria, or have been identified as endocrine disruptors (ED): The mixture contains no substances at concentrations ≥ concentration limits for classification as PBT, vPvB, or ED.
