Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
811-97-2
Name of the chemical
1,1,1,2-Tetrafluoroethane
Concentration
N/A
EC/CAS
5873-54-1
Name of the chemical
2,4’-Methylenediphenyl diisocyanate
Concentration
N/A
General Information
Revision date
2016-05-06
Product name
SFI-175 A-side, Cylinder
1.2.1 Relevant identified uses
Low pressure spray polyurethane foam, Side-A Component, for PROFESSIONAL USE ONLY
Manufacturer Name
ICP Adhesives and Sealants
Emergency telephone
In the U.S.A
Icons in SDS
Company Information
company name
ICP Adhesives and Sealants
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
Classifications
Skin Irritation- Category 2 Skin Sensitization- Category 1 Eye Irritation- Category 2A Acute Toxicity Inhalation- Category 4 Respiratory Sensitizer- Category 1 Specific Target Organ Toxicity, Single Exposure -Category 2 Specific Target Organ Toxicity (respiratory irritation)- Category 3 Specific Target Organ Toxicity, Repeated Exposure- Category 1
2.2 Label elements
Regulation (EC) No 1272/2008)
Signal word
DANGER
Hazard statements
H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H332 Harmful if inhaled H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled H335 May cause respiratory irritation H373 May cause damage to organs through prolonged or repeated exposure: respiratory system
Prevention
P260 Do not breathe dust/fume/gas/mist/vapours/spray P264 Wash hands and other skin areas exposed to material thoroughly after handling P270 Do not eat, drink, or smoke when using this product P271 Use outdoors or in a well-ventilated area P272 Contaminated work clothing should not be allowed out of the workplace P280 Wear protective gloves, protective clothing and eye protection P285 In case of inadequate ventilation wear respiratory protection
Response
P302+P352 IF ON SKIN: Wash with plenty of soap and water. P333+P313 If skin irritation or rash occurs: Get medical attention P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice. P337+P313 If eye irritation persists: Get medical attention P342+P311 If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician P362 Take off contaminated clothing and wash before reuse.
Storage
P403+P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.
Disposal
P501 Dispose of contents/container in accordance with applicable local/regional/national/international regulations.
2.3 Other hazards
Persons previously sensitized to isocyanates may develop a cross-sensitization reaction to other isocyanates. 2% of the mixture consists of ingredients of unknown acute oral toxicity 2% of the mixture consists of ingredients of unknown acute inhalation toxicity
