Note: Ingredients listed on restricted chemical lists
EC/CAS
409-21-2
Name of the chemical
Silicon carbide
Concentration
N/A
EC/CAS
1305-78-8
Name of the chemical
Calcium oxide
Concentration
N/A
EC/CAS
7789-75-5
Name of the chemical
Calcium fluoride
Concentration
N/A
General Information
Product name
Reinforced Resin Bonded Abrasive Products
1.2.1 Relevant identified uses
Cutting and/or Grinding
1.2.2. Uses advised against
Dangerous, improper use may cause wheel breakage and serious injury. Do not abuse, over speed or drop wheel. Safe to use only if mounted, guarded and operated according to ANSI B7.1 and OSHA Regulations. Read safety tips in package. Always use a guard!
Manufacturer Name
IBS, Inc
Icons in SDS
Company Information
company name
IBS, Inc
Section 2
SECTION 2: Hazards identification
OSHA Hazards Hazard Status This product Is classified as non-hazardous under OSHA Hazard Communication Standard, 29 CFR 1910.1200
2.2 Label elements
Not applicable
Hazard pictograms
Not applicable Description of Hazard(s): Respiratory: Wheel dust is a respiratory irritant Skin: Wheel dust and fiberglass reinforcement is a skin irritant Ingestion: Acute product toxicity unknown Eyes: Wheel dust is an eye irritant Chronic: Potential chronic effects include skin sensitization and restricted breathing Wear respirator, eye protection and protective clothing when using product. Product will produce sparks and debris when in use, never use this product near reactive or flammable substances Never use product if it comes in contact with water
Supplemental label elements
Prolonged exposure to elevated noise levels during operations may affect hearing. A greater hazard, in most cases, is the exposure to the dust/fumes from the material or paint/coatings being ground. Most of the dust generated during grinding is from the base material being ground and the potential hazard from this exposure must be evaluated. This dust may present a fire or dust explosion hazard and may present a serious health hazard. IBS, Inc. Reinforced Resin Bonded Abrasives SDS - 2019.0601 1
