Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-66-6
Name of the chemical
Zinc ()
Concentration
<2.8
EC/CAS
7440-47-3
Name of the chemical
Chromium‡
Concentration
<1.1
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
0-0.25
EC/CAS
7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
0-0.02
Listed in
General Information
Revision date
2015-06-01
Product name
ALUMINUM ARMOUR STRIP, 5xxx SERIES ALLOYS
1.2.1 Relevant identified uses
Aluminum Armour Strip Synonym(s) 5000 Series Aluminum, 5052 Aluminum, 5154 Aluminum
Emergency telephone
+1-703-527-3887, +1-800-424-9300, +1-508-238-7941
Icons in SDS
Company Information
company name
IBC Corp
Section 2
SECTION 2: Hazards identification
Emergency overview Solid. Silver colored. Odorless. Non-combustible as supplied. Small chips, fine turnings and dust from processing may be readily ignitable. Explosion/fire hazards may be present when (See Sections 5, 7 and 10 for additional information): • Dust or fines are dispersed in air. • Chips, dust or fines are in contact with water. • Dust and fines are in contact with certain metal oxides (e.g., rust, copper oxide). • Molten metal in contact with water/moisture or certain metal oxides (e.g., rust, copper oxide). Dust and fumes from processing: Can cause irritation of the eyes, skin and respiratory tract.
Potential health effects
The health effects listed below are not likely to occur unless processing of this product generates dusts or fumes. The following statements summarize the health effects generally expected in cases of overexposures. User specific situations should be assessed by a qualified individual. Additional health information can be found in Section 11. Eyes Skin Dust and fumes from processing: Can cause irritation. Contact with residual oil/oil coating: Can cause irritation. Prolonged or repeated skin contact may cause dermatitis. Dust and fumes from processing: Can cause irritation. Prolonged or repeated skin contact may cause sensitization and allergic contact dermatitis. Inhalation Health effects from mechanical processing (e.g., cutting, grinding): Dust Can cause irritation of the upper respiratory tract. Chronic overexposures Can cause scarring of the lungs (pulmonary fibrosis), central nervous system damage, secondary Parkinson's disease and reproductive harm in males. Additional health effects from elevated temperature processing (e.g., welding, melting): Dust and fumes Can cause irritation of the respiratory tract. Acute overexposures Can cause metal fume fever (nausea, chills, fever, shortness of breath and malaise), reduced ability of the blood to carry oxygen (methemaglobin) and the accumulation of fluid in the lungs (pulmonary edema). Chronic overexposures: Can cause lung cancer. Carcinogenicity and Reproductive Hazard Product as shipped: Does not present any cancer or reproductive hazards. Dust from mechanical processing: Can present a cancer hazard (Lead, Nickel). Can present a reproductive hazard (Lead, Manganese). Dust and fumes from welding or elevated temperature processing: Can present a cancer hazard (Hexavalent chromium compounds, Lead compounds, Nickel compounds, Welding fumes). Can present a reproductive hazard (Lead compounds, Manganese compounds). Medical conditions Dust and fumes from processing: Asthma, chronic lung disease, Secondary Parkinson's disease and aggravated by exposure to skin rashes. product