Note: Ingredients listed on restricted chemical lists
EC/CAS
220-666-8/2855-13-2
Name of the chemical
3-aminomethyl-3,5,5-trimethylcyclohexylamine
Concentration
≥1-≤5
EC/CAS
205-411-0/140-31-8
Name of the chemical
2-piperazin-1-ylethylamine
Concentration
≥1-≤5
General Information
Revision date
2025-05-28
Product name
Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B
1.2.1 Relevant identified uses
J-B Weld™ is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld™ sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld™ has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured
1.2.2. Uses advised against
Reason See information supplied by the manufacturer
supplier name
HPP Lunds
Emergency telephone
+1 (800) 535-5053, +1 (352) 323-3500, +1 (903) 885-7696
Icons in SDS
Company Information
company name
HPP Lunds
e-mail address of the competent person responsible for the Safety Data Sheet
sales@hpplunds.com.au, info@jbweld.com
GHS Information
Signal word
WARNING
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture ACUTE TOXICITY (oral) - Category 4 SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2A SKIN SENSITIZATION - Category 1
Signal word
WARNING
Hazard statements
Harmful if swallowed. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation.
Precautionary statements
General : Read carefully and follow all instructions. Keep out of reach of children. If medical advice is needed, have product container or label at hand.
Prevention
Wear protective gloves. Wear eye or face protection. Avoid breathing vapor. Do not eat, drink or smoke when using this product. Wash thoroughly after handling.
Response
IF ON SKIN Wash with plenty of water. If skin irritation or rash occurs Get medical advice or attention. Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
Storage
Not applicable.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Not applicable.
Other hazards which do not result in classification
None known.
2.1 Classification of the substance or mixture
ACUTE TOXICITY (oral) - Category 4 substance or mixture SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2A SKIN SENSITIZATION - Category 1