Note: Ingredients listed on restricted chemical lists
EC/CAS
220-666-8/2855-13-2
Name of the chemical
3-aminomethyl-3,5,5-trimethylcyclohexylamine
Concentration
≥1-≤5
General Information
Version
1.03
Revision date
2025-05-29
Product name
ClearWeld Syringe - Part B
1.2.1 Relevant identified uses
ClearWeld™ is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld™ is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld™ has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld™ sets to a hard, permanent bond
1.2.2. Uses advised against
Reason See information supplied by the manufacturer
supplier name
HPP Lunds
Emergency telephone
+1 (800) 535-5053, +1 (352) 323-3500, +1 (903) 885-7696
Icons in SDS
Company Information
company name
HPP Lunds
e-mail address of the competent person responsible for the Safety Data Sheet
sales@hpplunds.com.au, info@jbweld.com
GHS Information
Signal word
WARNING
Hazard Codes
Hazard statements (CLP)
H302, H315, H317, H319, H412
Hazard statements
Code
Statements
H302
Harmful if swallowed
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture ACUTE TOXICITY (oral) - Category 4 SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2A SKIN SENSITIZATION - Category 1 AQUATIC HAZARD (ACUTE) - Category 3 AQUATIC HAZARD (LONG-TERM) - Category 3 Percentage of the mixture consisting of ingredient(s) of unknown acute oral toxicity: 90%
Signal word
WARNING
Hazard statements
Harmful if swallowed. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful to aquatic life with long lasting effects.
Precautionary statements
General : Read carefully and follow all instructions. Keep out of reach of children. If medical advice is needed, have product container or label at hand.
Prevention
Wear protective gloves. Wear eye or face protection. Avoid release to the environment. Avoid breathing vapor. Do not eat, drink or smoke when using this product. Wash thoroughly after handling.
Response
IF ON SKIN Wash with plenty of water. If skin irritation or rash occurs Get medical advice or attention. Take off contaminated clothing and wash it before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
Storage
Not applicable.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental label elements
Not applicable.
Other hazards which do not result in classification
None known.
2.1 Classification of the substance or mixture
ACUTE TOXICITY (oral) - Category 4 substance or mixture SKIN CORROSION/IRRITATION - Category 2 SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2A SKIN SENSITIZATION - Category 1 AQUATIC HAZARD (ACUTE) - Category 3 AQUATIC HAZARD (LONG-TERM) - Category 3 Percentage of the mixture consisting of ingredient(s) of unknown acute oral toxicity: 90%
