EXTERIOR FIRE-X

Aspiration hazard

N/A Explosives – N/A Flammable Gases – N/A Flammable Aerosols – N/A Oxidizing Gases – N/A Gases Under Pressure – N/A Flammable Liquids – N/A _______________________________________________________________________________________________________________________________________ SDS Hoover Treated Wood Products, Inc. 1 Flammable Solids – Readily Combustible Solids, category 2 Self-Reactive Chemicals – N/A Pyrophoric Liquids – N/A Pyrophoric Solids – N/A Self-Heating Chemicals – N/A Chemicals Which, In Contact With Water, Emit Flammable Gases – N/A Oxidizing Liquids – N/A Oxidizing Solids – N/A Organic Peroxides – N/A Corrosive to Metals – N/A N/A = Not Applicable (b) Signal word, hazard statement(s), symbol(s) and precautionary statement(s) in accordance with paragraph (f) of

Disposal

Wash all body parts If on skin: Wash with which have come into plenty of water and soap. contact with any sawdust generated from If skin irritation occurs: sawing, grinding, Get medical advice. drilling, sanding, or machining Take off contaminated thoroughly after handling. clothing and wash it before reuse. Wear protective gloves. Any type that creates a barrier is acceptable Selection should be oriented to decrease contact with splinters and slivers of wood. _______________________________________________________________________________________________________________________________________ SDS Hoover Treated Wood Products, Inc. 2 Warning causes eye irritation Wash all body parts If in eyes: Rinse cautiously which have come into with water for several contact with any minutes. Remove contact sawdust generated from lenses, if present and easy sawing, grinding, to do. drilling, sanding, or Continue rinsing. machining thoroughly after handling. If eye irritation persists: Get medical advice. Danger may cause allergy or asthma symptoms or breathing difficulties if inhaled Avoid breathing dust. If inhaled: If breathing is Dispose of contents in difficult, remove the person accordance with all In case of inadequate to fresh air. applicable local, regional, ventilation wear national, or international respiratory protection. If experiencing rules and respiratory symptoms: regulations. Adequate ventilation is Call a poison considered that which center. keeps exposure limits at or below 15mg/m3 For a poison emergency in the U.S. call 1-800-222-1222 _______________________________________________________________________________________________________________________________________ SDS Hoover Treated Wood Products, Inc. 3 Warning may cause an allergic skin reaction Avoid breathing dust. If on skin: Wash with Dispose of contents in plenty of water and soap. accordance with all Contaminated work applicable local, regional, clothing must not be If skin irritation occurs: national, or international allowed out of the Get medical advice. rules and workplace regulations. Wash contaminated Wear protective gloves. clothing before reuse. Any type that creates a barrier is acceptable Selection should be oriented to decrease contact with splinters and slivers of wood. Warning suspected of causing cancer of the upper respiratory system Obtain special If exposed or concerned: Store locked up. Dispose of contents in instructions before use. Get medical advice. accordance with all applicable local, regional, Do not handle it until all national, or international safety precautions have rules and been read and regulations. understood. Wear protective gloves and eye protection. Acceptable gloves are any type that creates a barrier – Glove selection should be oriented to decrease contact with splinters and slivers of wood. _______________________________________________________________________________________________________________________________________ SDS Hoover Treated Wood Products, Inc. 4 Warning flammable solid Keep away from heat, In case of fire: Use sparks, open flames and water or wood hot surfaces. - No appropriate fire smoking. extinguishers to extinguish. Ground or Bond container and receiving equipment. Use explosion-proof electrical, ventilating, lighting, and processing equipment. Wear protective gloves and eye protection. Acceptable gloves are any type that creates a barrier – Glove selection should be oriented to decrease contact with splinters and slivers of wood. not otherwise classified that have been identified during the classification process; If small particles are generated during further processing, handling or by other means, may form combustible dust concentrations in air. The Occupational Safety and Health Administration