SAINT-GOBAIN (FURON) RATIO 2A:1B - ISO COMPONENT A

SECTION 2: Hazards identification

CLASSIFICATION OF THE CHEMICAL

Hazard categories

HAZARD CLASSIFICATION CATEGORY Acute Toxicity – Inhalation 4 Skin Corrosion/Irritation 2 Eye Damage/Irritation 2A Sensitization – Skin 1 Sensitization – Respiratory 1 STOT SE – Specific Target Organ Toxicity (Single Exposure) 3 STOT RE – Specific Target Organ Toxicity (Repeated Exposure) 2

Hazard pictograms

GHS07, GHS08

Signal word

Danger

Hazard statements

Causes skin irritation May cause an allergic skin reaction Causes serious eye irritation Harmful if inhaled May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause respiratory irritation May cause damage to organs (lungs) through prolonged or repeated (inhalation) exposure

Prevention

Do not breathe dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves/eye protection/face protection. In case of inadequate ventilation, wear respiratory protection.

Response

Specific treatment (see Section 8 on this label). If on skin: Wash with plenty of water. If skin irritation or a rash occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a poison/doctor. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Storage

Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Disposal

Dispose of contents and container in accordance with all local, regional, national and international regulations.

Additional information

Main symptoms Prolonged exposure may cause chronic effects. May cause damage to organs (lungs) through prolonged or repeated (inhalation) exposure. Skin irritation. May cause redness and pain. May cause allergic skin reaction. Dermatitis. Rash. Causes serious eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Difficulty breathing. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Animal tests and other research indicate that skin contact with MDI can play a role in causing isocyanate sensitization and respiratory reaction. Lung damage and respiratory sensitization may be permanent. Hazards not otherwise specified None Known 4.45% of the mixture consists of ingredient(s) of unknown acute toxicity

2.1 Classification of the substance or mixture

Hazard class: HAZARD CLASSIFICATION CATEGORY Acute Toxicity – Inhalation 4 Skin Corrosion/Irritation 2 Eye Damage/Irritation 2A Sensitization – Skin 1 Sensitization – Respiratory 1 STOT SE – Specific Target Organ Toxicity (Single Exposure) 3 STOT RE – Specific Target Organ Toxicity (Repeated Exposure) 2