Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
<55%
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
38%
EC/CAS
26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (see also specific isomers)
Concentration
<10%
General Information
Revision date
2023-09-19
Product name
ELEVATE I.S.0. SPRAY R Adhesive Part A
Product name
ELEVATE I.S.0. SPRAY R Adhesive Part A
Identification on the label/Trade name
ELEVATE ISO SPRAY R Adhesive Part A
1.2.1 Relevant identified uses
Construction Use this product in accordance with all local, regional, national and international regulations
Emergency telephone
1-800-424-9300, +1-703-527-3887
Icons in SDS
Company Information
company name
Holcim Solutions and Products US, LLC
GHS Information
Signal word
DANGER
Section 2
SECTION 2: Hazards identification
CLASSIFICATION OF THE CHEMICAL
Hazard categories
HAZARD CLASSIFICATION CATEGORY Skin Corrosion/Irritation Eye Damage/Irritation Sensitization - Respiratory NY RPM Carcinogenicity STOT SE - Specific Toxic Organ Toxicity (Single Exposure) NWN STOT RE - Specific Toxic Organ Toxicity (Repeated Exposure)
Signal word
DANGER
Hazard statements
Fatal if swallowed. Causes skin irritation. Causes serious eye irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May cause damage to organs through prolonged or repeated exposure.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. In case of inadequate ventilation, wear respiratory protection.
Response
If on skin: Wash with plenty of water. Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention. If inhaled: Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms Call a poison/doctor. If in eyes Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Additional information
Main symptoms Direct contact with eyes may cause temporary irritation. Prolonged exposure may cause chronic effects. Causes damage to organs (lungs) through prolonged or repeated (inhalation) exposure. Skin irritation. May cause redness and pain. May cause allergic skin reaction. Dermatitis. Rash. Causes serious eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Difficulty breathing. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Animal tests and other research indicate that skin contact with MDI can play a role in causing isocyanate sensitization and respiratory reaction. Lung damage and respiratory sensitization may be permanent. Hazards not otherwise specified None Known
2.1 Classification of the substance or mixture
Hazard class: HAZARD CLASSIFICATION CATEGORY Skin Corrosion/Irritation NY Eye Damage/Irritation Sensitization - Respiratory RPM Carcinogenicity STOT SE - Specific Toxic Organ Toxicity (Single Exposure) STOT RE - Specific Toxic Organ Toxicity (Repeated Exposure) NWN
