Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-38-2
Name of the chemical
Arsenic (As)
Concentration
N/A
EC/CAS
7439-92-1
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
N/A
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
231-148-6
Name of the chemical
Arsenic and its compounds
Concentration
N/A
EC/CAS
231-100-4
Name of the chemical
Blei, massiv: [Partikeldurchmesser ≥ 1 mm]
Concentration
N/A
EC/CAS
231-159-6
Name of the chemical
Copper (nano) [INCI] (11), Colloidal Copper (nano) [INCI] (11)
Concentration
N/A
General Information
Revision date
2021-02-04
Product name
Information sheet for articles
Icons in SDS
Company Information
company name
HME SE affiliates, hereinafter referred to as
e-mail address of the competent person responsible for the Safety Data Sheet
info@HMEmetal.com, heiko.stoelting@hmemetal.com, info@hmemetal.com
Section 2
SECTION 2: Hazards identification
When supplied in solid form the articles from copper and copper alloys are non-hazardous. If they are subsequently processed in any way, which might produce airborne dust or fumes, for instance by dry grinding, abrading, electro discharge machining, melting or welding (the material itself) then an inhalation hazard could arise. General handling, stamping, forming and most machining operations are non-hazardous. Heat treatment in air up to about 400 °C is non-hazardous but higher temperatures may give rise to loss of oxide, which could cause hazardous inhalation. This could be avoided by treatment in inert atmosphere.
