Hilti HIT-HY 10 PLUS

2.1 Classification of the substance or mixture

according to GHS Classifications Not classified as a hazardous chemical according to GHS.

2.3 Other hazards

Board Product does not present an inhalation, ingestion, or contact health hazard unless subjected to operations such as cutting, sawing or machining which result in the generation of airborne particulate.

Other hazards

Classifications USA: This product conforms to the U.S. Occupational Safety and Health Administration

Additional information

See Section 8 for information on selection of personal protective equipment. See Section 13 for information on disposal of spilled product. Page Page 276 276 276 of of of of 622 622 7 Handling and Storage Precautions for safe handling: During cutting machining operations, avoid contact with eyes and skin. Wear protective gloves. Avoid breathing dusts. Do not eat, drink or smoke in work areas. Wash hands thoroughly after handling this material. Conditions for safe storage, including any compatibilties: KEEP OUT OF REACH OF CHILDREN. Protect from water and moisture. See Section 13 for disposal considerations. 8 Exposure Controls / Personal Protection Occupational exposure Limits: Consult local authorities for acceptable exposure limits. . INGREDIENT ACGIH TWA U.S For additional product and / or MSDS information, please contact Kingspan Insulation LLC at (800) 241-4402. Information provided by sources external to our company and set forth herein is offered in good faith as accurate, but without guarantee. Safety precautions contained herein cannot anticipate all individual and unique situations. Conditions of use and suitability of the product for particular uses are beyond our control. All risks of use of the product are, therefore, assumed by the user, and we expressly disclaim all warranties of every kind and nature, including warranties of merchantability and fitness for a particular purpose in respect to the use or suitability of the product. Nothing herein is intended as recommendation for uses which infringe valid patents or as extension of license under valid patents. Appropriate warnings and safe handling procedures should be provided to users. Kingspan Insulation LLC 2100 RiverEdge Parkway, Suite 175, Atlanta, Georgia 30328 info@kingspaninsulation.us 1-800-241-4402 www.kingspaninsulation.us www.kingspaninsulation.ca ® Kingspan, the G Device and the Lion Device are Registered Trademarks of the Kingspan Group plc in the US, Canada and other countries. All rights reserved. ® GreenGuard is a Registered Trademark of the Kingspan Group plc in the US. All rights reserved. SDS-INS Page Page 280 280 280 of of of of 622

Appearance/Odor

Solid; Green extruded polystyrene insulation board. Odorless. Odor threshold: Not applicable. pH: Not applicable. Melting point: >93°C (200°F). Initial boiling point and boiling range: Not applicable. Evaporation Rate: Not applicable. Flash point: Not applicable. Flammability: >260° C (500°F) ASTM D 1929. Page Page 277 277 277 of of of of 622 622 Auto-ignition temperature: >482°C (900°F). Upper / lower flammability or explosive limits: Not applicable. Explosive properties: Not applicable. Oxidizing properties: Not applicable. Sensitivity to mechanical impact: Not applicable. Sensitivity to static discharge: Not available. Vapor pressure : Not applicable. Vapor Density: Not applicable. Relative density: 0.07 (water=1). Solubility (is): Insoluble in water. Partition coefficient (n-octane / water): Not applicable. Decomposition temperature: Not available. VOC Content: Not available. Viscosity: Not applicable. 10 Stability and Reactivity Reactivity: Not classified for reactivity hazards. Chemical stability: Stable at normal ambient and anticipated storage and handling conditions. Possibility of hazardous reactions: None known. Conditions to avoid: Do not use in conditions of extreme heat or near open flames. Incompatible materials: Strong oxidizers, aromatic and chlorinated hydrocarbons. Hazardous decomposition products: Thermal decomposition and incomplete combustion can produce toxic fumes containing the following: acids, acrolein, aldyhydes, halogens, ketones, monomers, possible hydrocarbons, carbon monoxide and carbon dioxide.

TOXICOLOGICAL INFORMATION

Information on toxicological effects:

Potential Acute Health Effects

Acute toxicity data are not available for this article. Irritation: Worker experience with this material indicates the product is non-irritating. Animal test data indicates the material is non-irritating. Dusts of this product may cause mild, temporary skin irritation by mechanical abrasion. Dusts may cause temporary irritation as a foreign objection in the eye.

Potential chronic health

None known Sensitization: None known. Neurological effects: None known. Genetic effects: None known. Reproductive effects: Data not available. Developmental effects For the flame retardant additive listed in section 3 NOAEL for teratogenic effects = 1,000 mg/kg bw (rat, gavage). Page Page 278 278 278 of of of of 622 622 Target organ effects: None known. Carcinogenicity: The component substances are not classified as carcinogens in humans as described by ACGIH (American Conference of Governmental Industrial Hygienists) and IARC (International Agency for Research on Cancer).

Medical Conditions Generally Aggravated by Exposure

None known.

Interactions with other chemicals

Tobacco smoking in combination with long-term high dust exposures may increase both smoking and dust-related pulmonary health problems.

ECOLOGICAL INFORMATION

Toxicity: Not available. Persistence and degradability: This product is not readily bio-degradable. Plastic components will photodegrade with prolonged exposures to UV light (e.g. sunlight). Product is treated with a flame retardant substance which is known to be persistent, bioaccumulative and toxic in the aquatic environment. Prevent releases to the environment and ensure proper disposal. Bioaccumulative potential: Not available. Mobility in soil: Not available.

Disposal

Considerations Waste treatment methods: Where facilities exist, the product and packaging can be recycled. Dispose in accordance with local regulations. Store material for disposal as indicated in Section 7 Handling and Storage. Proper incineration in state-of-the-art incinerators equipped with after-burners, yields carbon dioxide and water. Polymer materials may not decompose in modern sanitary landfills. Materials may be recycled where adequate collection and recycling facilities exist. 14 Transport Information

UN Number

Not regulated as a dangerous good for transport. UN proper shipping name: Not regulated as a dangerous good for transport. Transport hazard class(es): Not applicable. Packing group: Not applicable.

Environmental hazards

Not applicable. Special precautions for user: None known. 15 Regulatory Information Safety, health and environmental regulations / legislation specific for the substance or mixture: USA:

Contains

Hexabromocyclododecane as flame-retardant TSCA Section 8(a) PAIR reporting list; Section 8(d) health and safety reporting list of substances. SARA Title III : Sec.302 / 304 : None. Sec. 313 : None. Canada:

Further information

Revision Date: October 1, 2014. References and sources for data: Supplier MSDS for component materials. Legend to abbreviations: ACGIH: American Conference of Governmental Industrial Hygienists. GHS: Globally Harmonized System for Classification and Labeling, UNECE 2013. IARC: International Agency for Research on Cancer.