Note: Ingredients listed on restricted chemical lists
EC/CAS
7173-51-5
Name of the chemical
Didecyldimethylammonium chloride
Concentration
N/A
General Information
Revision date
2019-03-21
Product name
HG algae and mould remover
1.2.1 Relevant identified uses
FOR USE ONLY AS A SURFACE BIOCIDE Dilute 1 litre of product with 20 litres of water, then apply at a rate of 1 litre of diluted product per 10 square metres of surface. The (COSHH) Control of Substances Hazardous to Health Regulations 1994 may apply to the use of this product at work Wear suitable protective clothing, gloves and eye/face protection. THIS MATERIAL
supplier name
HG Hagesan UK Ltd
Icons in SDS
Company Information
company name
HG Hagesan UK Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
info@hg.eu, safety@hg.eu
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H318, H400, H412
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
1272/2008]
Product definition
Mixture
CLP CLASSIFICATION
Skin Irrit. 2, H315 Eye Dam. 1, H318 Aquatic Acute 1, H400 (M=1) Aquatic Chronic 3, H412 The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended. See Section 16 for the full text of the H statements declared above. See Section 11 for more detailed information on health effects and symptoms.
Signal word
Danger
Hazard statements
Causes serious eye damage. Causes skin irritation. Very toxic to aquatic life. Harmful to aquatic life with long lasting effects.
Precautionary statements
General : If medical advice is needed, have product container or label at hand. Keep out of reach of children.
Prevention
Wear protective gloves and eye protection:
Response
IF ON SKIN Wash with plenty of soap and water. IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage
Not applicable.
Disposal
Dispose of contents and container in accordance with all local, regional, national and international regulations.
Hazardous Ingredients
didecyldimethylammonium chloride
Supplemental label elements
Not applicable. elements
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
Not applicable.
Special packaging requirements
Containers to be fitted Not applicable. with child-resistant fastenings
Tactile warning of danger
Not applicable. Biocidal products regulation Active substances Ingredient name % didecyldimethylammonium chloride - 2.5 - 10 Authorisation number : HSE 6086
Other hazards which do not result in classification
None known.
