Note: Ingredients listed on restricted chemical lists
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
N/A
EC/CAS
141-78-6
Name of the chemical
acetic acid, ethyl ester
Concentration
N/A
EC/CAS
108-10-1
Name of the chemical
4-methylpentan-2-one; isobutyl methyl ketone (MIBK)
Concentration
N/A
EC/CAS
1333-86-4
Name of the chemical
carbon black
Concentration
N/A
EC/CAS
64742-89-8
Name of the chemical
Solvent naphtha (petroleum), light aliph
Concentration
N/A
General Information
Revision date
2020-10-22
Product name
HIGH SOLIDS POLYURETHANE TOPCOAT
1.2.1 Relevant identified uses
Industrial paint (Paint or Paint-Related), Restricted to
Icons in SDS
Company Information
company name
Hentzen Coatings, Inc
GHS Information
Signal word
DANGER
Section 2
2.1 Classification of the substance or mixture
OSHA Regulatory Status This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Acute toxicity - Oral Category 4 Acute toxicity - Inhalation (Dusts/Mists) Category 4 Skin Corrosion/Irritation Category 2 Serious eye damage/eye irritation Category 2 Germ Cell Mutagenicity Category 1B Carcinogenicity Category 1B Flammable Liquids Category 2
2.2 Label elements
Emergency Overview DANGER
Hazard statements
Harmful if swallowed harmful if inhaled Causes skin irritation Causes serious eye irritation May cause genetic defects May cause cancer Highly flammable liquid and vapor Appearance Opaque Physical state Liquid Odor Solvent
Prevention
Obtain special instructions before use Do not handle until all safety precautions have been read and understood Use personal protective equipment as required Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product Avoid breathing dust/fume/gas/mist/vapors/spray Use only outdoors or in a well-ventilated area Wear eye/face protection Keep away from heat/sparks/open flames/hot surfaces. - No smoking Keep container tightly closed Ground/Bond container and receiving equipment Use explosion-proof electrical/ ventilating/ lighting/ equipment Use only non-sparking tools Take precautionary measures against static discharge
Response
IF exposed or concerned: Get medical advice/attention IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing If eye irritation persists: Get medical advice/attention If skin irritation occurs: Get medical advice/attention IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower Wash contaminated clothing before reuse IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell Rinse mouth In case of fire: Use CO2, dry chemical, or foam for extinction
Storage
Store in a well-ventilated place. Keep cool Store in accordance with local regulations
Precautionary statements
Disposal Dispose of contents/container to an approved waste disposal plant
Further information
Harmful to aquatic life with long lasting effects • Harmful to aquatic life