Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
80-100%
General Information
Revision date
2018-10-31
Product name
Ponal Statik (A) 2K-Expansionskleber
1.2.1 Relevant identified uses
Expansion adhesive, 2-component without propellant gas
Emergency telephone
+49-(0)211-797-3350
Icons in SDS
Company Information
company name
Henkel AG & Co. KGaA
e-mail address of the competent person responsible for the Safety Data Sheet
ua-productsafety.de@henkel.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Classification (CLP) Classification of the substance or mixture
2.2 Label elements
(CLP)
Contains
Diphenylmethane diisocyanate, isomers and homologues
Signal word
Danger
Hazard statements
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. H351 Suspected of causing cancer. H373 May cause damage to organs through prolonged or repeated exposure.
Precautionary statements
P102 Keep out of reach of children. P101 If medical advice is needed, have product container or label at hand. P271 Use only outdoors or in a well-ventilated area. P501 Dispose of contents/container in accordance with national regulation.
Prevention
P260 Do not breathe vapours. P280 Wear protective gloves/eye protection.
2.3 Other hazards
Information according to XVII. 56 REACH Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used. Pregnant women should absolutely avoid inhalation and skin contact. Solvents contained in the product evaporate during processing and their vapors can form explosive/highly inflammable air/vapor mixtures.
2.1 Classification of the substance or mixture
Classification (CLP): Skin irritation Category 2 H315 Causes skin irritation. Skin sensitizer Category 1 H317 May cause an allergic skin reaction. Serious eye irritation Category 2 H319 Causes serious eye irritation. Acute toxicity Category 4 H332 Harmful if inhaled. Route of Exposure: Inhalation Respiratory sensitizer Category 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. Specific target organ toxicity - single exposure Category 3 H335 May cause respiratory irritation. Target organ: respiratory tract irritation Carcinogenicity Category 2 H351 Suspected of causing cancer. Specific target organ toxicity - repeated exposure Category 2 H373 May cause damage to organs through prolonged or repeated exposure.