Note: Ingredients listed on restricted chemical lists
EC/CAS
201-204-4/79-41-4
Name of the chemical
methacrylic acid
Concentration
>=1-<5%
EC/CAS
202-704-5/98-82-8
Name of the chemical
Cumol (2022/692)
Concentration
=0,1-<2,5
EC/CAS
219-784-2/2530-83-8
Name of the chemical
[3-(2,3-epoxypropoxy)propyl]trimethoxy silane
Concentration
>=1-<5%
EC/CAS
201-177-9/79-10-7
Name of the chemical
acrylic acid
Concentration
>=1-<5%
EC/CAS
212-782-2/868-77-9
Name of the chemical
2-hydroxyethyl methacrylate
Concentration
>=0,1-<1%
General Information
Revision date
2011-10-10
Product name
Loctite Glass Bond
Icons in SDS
Company Information
company name
Henkel Limited
e-mail address of the competent person responsible for the Safety Data Sheet
ua-productsafety.uk@uk.henkel.com, technical.services@henkel.co.uk
Section 2
Classification (DPD)
Xi - Irritant R37/38 Irritating to respiratory system and skin. R41 Risk of serious damage to eyes. Sensitizing R43 May cause sensitisation by skin contact. N - Dangerous for the
Environmental hazards
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
2.2 Label elements
DPD) Xi - Irritant N - Dangerous for the
Hazard statements
R37/38 Irritating to respiratory system and skin. R41 Risk of serious damage to eyes. R43 May cause sensitisation by skin contact. R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Precautionary statements
S2 Keep out of the reach of children. S24 Avoid contact with skin. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 After contact with skin, wash immediately with plenty of water and soap. S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). S61 Avoid release to the environment. Refer to special instructions/Safety data sheets.
Contains
Hydroxypropyl methacrylate
2.3 Other hazards
Non corrosive to skin in accordance with the invitro test method, B40 skin corrosion - Human skin model assay, specified in Part B of Annex V to Directive 67/548/EEC.
