Note: Ingredients listed on restricted chemical lists
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
N/A
EC/CAS
80-62-6
Name of the chemical
methacrylic acid, methyl ester
Concentration
N/A
EC/CAS
79-00-5
Name of the chemical
1,1,2-Trichloroethane
Concentration
N/A
EC/CAS
128-37-0
Name of the chemical
2,6-di-tert-butyl-p-cresol
Concentration
N/A
EC/CAS
201-166-9
Name of the chemical
1,1,2-Trichlorethan
Concentration
N/A
EC/CAS
204-881-4
Name of the chemical
Butylated Hydroxytoluene
Concentration
N/A
General Information
Revision date
2013-02-19
Product name
LOCTITE 3295 PART A
Icons in SDS
Company Information
company name
Henkel Limited
e-mail address of the competent person responsible for the Safety Data Sheet
ua-productsafety.uk@uk.henkel.com
Section 2
Classification (DPD)
F - Highly flammable R11 Highly flammable. Sensitizing R43 May cause sensitisation by skin contact. Xi - Irritant R37/38 Irritating to respiratory system and skin. R41 Risk of serious damage to eyes. Dangerous for the environment R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
2.2 Label elements
DPD) F - Highly flammable Xi - Irritant
Hazard statements
R11 Highly flammable. R37/38 Irritating to respiratory system and skin. R41 Risk of serious damage to eyes. R43 May cause sensitisation by skin contact. R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Precautionary statements
S9 Keep container in a well-ventilated place. S16 Keep away from sources of ignition - No smoking. S24 Avoid contact with skin. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S51 Use only in well-ventilated areas. S61 Avoid release to the environment. Refer to special instructions/Safety data sheets.
Additional information
Contains epoxy constituents. See information supplied by the manufacturer. For use in industrial installations only.
Contains
Methyl methacrylate, Methacrylic acid, Bisphenol-A epichlorhydrin resin MW <= 700
2.3 Other hazards
Non corrosive to skin in accordance with the invitro test method, B40 skin corrosion - Human skin model assay, specified in Part B of Annex V to Directive 67/548/EEC.
