Note: Ingredients listed on restricted chemical lists
EC/CAS
6864-37-5
Name of the chemical
2,2'-dimethyl-4,4'-methylenebis(cyclohexylamine)
Concentration
N/A
EC/CAS
1761-71-3
Name of the chemical
bis(4-aminocyclohexyl)methane
Concentration
N/A
General Information
Revision date
2011-10-26
Product name
EA 9396/C2 PART B PINT
1.2.1 Relevant identified uses
Part B of 2-Component Epoxy Adhesive
Icons in SDS
Company Information
company name
Henkel Limited
e-mail address of the competent person responsible for the Safety Data Sheet
ua-productsafety.uk@uk.henkel.com
Section 2
Classification (DPD)
T - Toxic R23/24 Toxic by inhalation and in contact with skin. C - Corrosive R35 Causes severe burns. Xn - Harmful R22 Harmful if swallowed. Sensitizing R43 May cause sensitisation by skin contact. Dangerous for the environment R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
2.2 Label elements
DPD) T - Toxic N - Dangerous for the
Hazard statements
R22 Harmful if swallowed. R23/24 Toxic by inhalation and in contact with skin. R35 Causes severe burns. R43 May cause sensitisation by skin contact. R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Precautionary statements
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S35 This material and its container must be disposed of in a safe way. S36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). S57 Use appropriate container to avoid environmental contamination. S61 Avoid release to the environment. Refer to special instructions/Safety data sheets.
Additional information
Restricted to professional users.
Contains
2,2'-Dimethyl-4,4'-methylenebis(cyclohexylamine), 4,4'-Methylenebis(cyclohexylamine), Diaminocyclohexane, 1,2-
2.3 Other hazards
None if used properly.
