7113 POST ASSEMBLEY ACT 150ML

Hazard statements (CLP)

H222, H229, H336

Code

Statements

H222

Extremely flammable aerosol

SECTION 2: Hazards identification

Classification of the substance or mixture Classification (DPD) F+ - Extremely flammable R12 Extremely flammable Xi - Irritant R38 Irritating to skin Dangerous for the environment R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment R67 Vapours may cause drowsiness and dizziness

2.2 Label elements

(DPD) N - Dangerous for the Xi - Irritant F+ - Extremely flammable

Hazard statements

R12 Extremely flammable. R38 Irritating to skin. R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R67 Vapours may cause drowsiness and dizziness.

Precautionary statements

S23 Do not breathe vapour. S28 After contact with skin, wash immediately with plenty of water and soap. S51 Use only in well-ventilated areas. S61 Avoid release to the environment. Refer to special instructions/Safety data sheets.

Additional information

Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - No smoking. Keep out of the reach of children

Contains

n-Heptane N-tert-Butyl-2-benzothiazolesulfenamide. May produce an allergic reaction

2.3 Other hazards

The aerosol container is under pressure. Do not expose to high temperatures.

2.1 Classification of the substance or mixture

Classification (DPD): F+ - Extremely flammable R12 Extremely flammable. Xi - Irritant R38 Irritating to skin. Dangerous for the environment R50/53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R67 Vapours may cause drowsiness and dizziness.