Note: Ingredients listed on restricted chemical lists
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
1-5
General Information
Version
001.0
Revision date
2009-05-18
Product name
PURMELT R-200F+ 551
1.2.1 Relevant identified uses
Adhesive Region Canada
Emergency telephone
860.571.5100 1001
Icons in SDS
Company Information
company name
Henkel Corporation
Section 2
SECTION 2: Hazards identification
EMERGENCY OVERVIEW Physical state solid
Principle Routes of Exposure
Skin, Inhalation, Eyes
Potential health effects
Inhalation Methylene bisphenyl isocyanate (MDI) vapors or mist at concentrations above the TLV can irritate the mucous membranes in the respiratory tract (nose, throat, lungs) causing runny nose, sore throat, coughing, chest discomfort, shortness of breath and reduced lung function (breathing obstruction). This product may cause sensitization by inhalation and skin contact. Repeated exposure may lead to respiratory sensitization reactions, producing an asthma-like condition. Skin contact Eye contact Ingestion Repeated or prolonged skin contact may result in allergic sensitization. May cause skin irritation. Molten adhesive may cause severe burns. Liquid or vapor can cause moderate to severe irritation. Harmful if swallowed. Not expected under normal conditions of use. Existing conditions aggravated by Pre-existing skin or lung allergies may increase the chance of developing exaggerated allergic exposure symptoms from exposure to this product. Existing conditions aggravated by exposure: Skin disorders. See Section 11 for additional toxicological information.
