POLYSEAMSEAL (R) ALL-PURPOSE ADHESIVE

Hazardous Ingredients

Name CAS Number percent TSCA N-Butyl Acetate 0123-86-4 < 5.0 ¥ Titanium Dioxide ** . 13463-67-7 < sl0 Y Ethylene Glycol 107-21-1 < 5.0 Y Ingredient Notes

Acute Health Hazards

Route Species Exposure and Dose

Principle Routes of Exposure

ENTRY THROUGH...Inhalation and skin most likely CARCINOGENICITY... NTP? N/E IARC Monographs? N/E OHSA? NO EFFECTS OF OVEREXPOSURE Inhalation: May cause nose or throat irritation. Skin/Eye Contact: May cause irritation. Ingestion: Swallowing large amounts May cause nausea, vomiting. ( an unlikelyroute of entry ) FIRST AID MEASURES Inhalation: If affected by inhalation, remove to fresh air. Eye Contact: Flush with water for at least 15 minutes and get prompt medical attention. MSDS Number: 1151099 Version Number 4 Revision Date: October 23, 2009 Page Number: 3 Skin Contact: Wash skin thoroughly with soap and water. Ingestion: Drink water, and get medical attention. N/A= Not applicable N/AV=Not available N/E, N/est=Not established CHRONIC HAZARDS Swallowing ETHYLENE GLYCOL may cause gastrointestinal irritation. Butyl Acetate: Vapor harmful. May affect brain and nervous system causing dizziness, headaches or nausea. May cause severe eye irritation upon eye contact. NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain, nervous system, liver or kidney damage or may cause cardiac arrhythmia. INTENTIONAL misuse of this product by deliberately inhaling its vapors may be harmful or fatal. SECTION VI - STABILITY AND REACTIVITY Stability: Product is stable under normal storage conditions Hazardous Polymerization: Will not occur under normal conditions INCOMPATABILITY: None CONDITIONS TO AVOID: None HAZARDOUS DECOMPOSITION PRODUCTS: May produce oxides of carbon and oxides of nitrogen when burned. SECTION VII - ACCIDENTAL RELEASE AND DISPOSAL MEASURES: STEPS TO BE TAKEN IN CASE OF SPILL: Wear appropriate protective clothing. Add dry absorbent and shovel or sweep up. Place in an appropriate container and seal. WASTE DISPOSAL METHOD: Dispose of in accordance with Federal, State, and Local regulations. SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION Occupational Exposure Limits ACGEH LY ACGIH TLV-C pcGrn sTEL OSHA STEL OSHA PEL N-Butyl Acetate 50.00 PEM N/est 200.00 PPM 150. 150.00 PPM Titanium Dioxide ** 10.00 mg/F3 N/est 15.00 mg/F3 MSDS Number: 1151099 Version Number Revision Date: October 23, 2009 Page Number: 4 Ethylene Glycol N/est 100.00 mg/M3 N/est 50.00 PPM RESPIRATORY PROTECTION: NIOSH respirators recommended if vapors and mists are generated. VENTILATION: Local exhaust is recommended for safe practice. PROTECTIVE CLOTHING: Gloves and clothing should be worn to prevent repeated