PL(R)

SECTION 2: Hazards identification

CHRONIC HAZARDS: Preexisting respiratory or skin conditions may be aggravated by exposure. This product

Contains

an isocyanate. Skin and respiratory sensitization can result from repeated exposures to isocyanates. For most individuals these effects are reversible. Persons previously sensitized to isocyanates may experience an allergic respiratory reaction: signs/symptoms can include difficulty breathing, wheezing, tightness of chest, and respiratory failure. Allergic response may be delayed several hours after exposure. Seek immediate medical attention. If known allergy, do not use this product NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain, nervous system, liver or kidney damage or may cause cardiac arrhythmia. INTENTIONAL misuse of this product by deliberately inhaling its vapors may be harmful or fatal. SECTION VI - STABILITY AND REACTIVITY Stability: Product ig stable under normal storage conditions Hazardous Polymerization: Will not occur under normal conditions INCOMPATABILITY: Keep away from strong oxidizing agents, alkalies, acids, and water contamination. CONDITIONS TO AVOID: Keep away from heat, spark, and open flame. Product cures in contact with water. HAZARDOUS DECOMPOSITION PRODUCTS: Will produce fumes and smoke containing carbon monoxide and dioxide and nitrogen oxides under fire conditions. SECTION VII - ACCIDENTAL RELEASE AND DISPOSAL MEASURES: STEPS TO BE TAKEN IN CASE OF SPILL: ventilate confined areas. (Open windows and doors Cover with absorbent, scoop into sealable safety container. Wear protective clothing. WASTE DISPOSAL METHOD: Dispose of following local, state, and federal regulations. SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION Occupational Exposure Limits ACGIH TLV ACGIH TLV-C OSHA PEL ACGIH STEL OSHA STEL Hydrotreated Naphtha 200.00 mg/M3 N/est N/fest N/est 4,4’ Diphenylmethane Diisocyanate N/est PPM 0.01 PPM N/est 0.02 POLYMERIC MDI Isocyanate N/est RESPIRATORY PROTECTION: If TLV of the product is exceeded, wear NIOSH/MSHA jointly approved respiratory protection in the absence of proper ventilation. Follow applicable OSHA regulations. VENTILATION: Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below TLV. Ventilate during application and curing of this product. PROTECTIVE CLOTHING: Rubber gloves should be worn. Cover arms and legs to minimize exposure.