Note: Ingredients listed on restricted chemical lists
EC/CAS
1344-09-8
Name of the chemical
Silicic acid, sodium salt
Concentration
>=10-<20%
General Information
Version
001.1
Revision date
2023-05-19
Product name
KENRA NO AMMONIA DUAL BOND WHITE POWDER
supplier name
chemical manufacturer
Emergency telephone
1-800-258-3425
Icons in SDS
Company Information
company name
Henkel Corporation
GHS Information
Signal word
DANGER
Section 2
SECTION 2: Hazards identification
(29 CFR 1910.1200) The hazards described in this Globally Harmonized System Safety Data Sheet (SDS) are not intended for consumers, and does not address consumer use of the product. For information regarding consumer applications of this product, refer to the product label.
Hazard categories
OXIDIZING SOLID ACUTE TOXICITY ORAL SKIN CORROSION 1C - Corrosive SERIOUS EYE DAMAGE RESPIRATORY SENSITIZATION SKIN SENSITIZATION SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE
Signal word
DANGER Hazard Statement(s) May intensify fire; oxidizer Harmful if swallowed Causes severe skin burns and eye damage May cause an allergic skin reaction May cause allergy or asthma symptoms or breathing difficulties if inhaled May cause respiratory irritation Symbol(s)
Prevention
Keep away from heat. Keep away from clothing and other combustible materials. Take any precaution to avoid mixing with combustibles. Do not breathe dust or fumes. Wash affected area thoroughly after handling. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves, clothing, eye and face protection. In case of inadequate ventilation wear respiratory protection.
Response
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Immediately call a POISON CENTER or physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If skin irritation or rash occurs: Get medical attention. If experiencing respiratory symptoms: Call a poison center or physician. Wash contaminated clothing before reuse. In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
Storage
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Disposal
Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
2.3 Other hazards
Not available. Percentage of ingredient(s) with unknown toxicity: 2 % of the mixture consists of ingredient(s) of unknown acute toxicity.
2.1 Classification of the substance or mixture
HAZARD CLASS HAZARD CATEGORY OXIDIZING SOLID 3 ACUTE TOXICITY ORAL 4 SKIN CORROSION 1C - Corrosive SERIOUS EYE DAMAGE 1 RESPIRATORY SENSITIZATION 1 SKIN SENSITIZATION 1 SPECIFIC TARGET ORGAN TOXICITY - SINGLE EXPOSURE 3 Signal word, hazard statement(s), symbol(s) and precautionary statement(s) in accordance with paragraph (f) of §1910.1200 Signal word: DANGER Hazard Statement(s): May intensify fire; oxidizer. Harmful if swallowed. Causes severe skin burns and eye damage. May cause an allergic skin reaction. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Symbol(s)