HARDENER 21-15

Helios TBLUS d.o.o

Revision date : 2022-02-03

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS05 GHS07
Health risk rating 4
Safety risk rating 2
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

204-658-1/123-86-4

Name of the chemical

acetic acid, butyl ester

Concentration

>=10-<20

EC/CAS

219-784-2/2530-83-8

Name of the chemical

[3-(2,3-epoxypropoxy)propyl]trimethoxy silane

Concentration

>=10-<20

EC/CAS

212-485-8/822-06-0

Name of the chemical

Hexamethylene diisocyanate

Concentration

<0,1 >=0,5% >=0,5%

General Information

Version

1.2

Revision date

2022-02-03

Product name

HARDENER 21-15

1.2.1 Relevant identified uses

Use at industrial sites, Widespread use by professional work ers Industrial spraying Hardeners, Industrial products for protection of metals

1.2.2. Uses advised against

Reserved for industrial and professional use., Restricted to on use professional users. Attention - Avoid exposure - obtain special instructions before use

Emergency telephone

0844 892 0111

Icons in SDS

GHS02 GHS05 GHS07 M004 M009 M010 M013 M017

Company Information

company name

Helios TBLUS d.o.o

e-mail address of the competent person responsible for the Safety Data Sheet

productsafety@helios.si

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H226, H317, H318, H332, H335

Hazard statements

Code

Statements

H226

Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 Classification of the substance or mixture

Signal word

Danger

Hazard statements

H226 Flammable liquid and vapour. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H332 Harmful if inhaled. H335 May cause respiratory irritation.

Prevention

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261 Avoid breathing mist or vapours. P280 Wear protective gloves/ protective clothing/ eye protec- tion/ face protection/ hearing protection.

Response

P303 + P361 + P353 IF ON SKIN (or hair): Take off immedi- ately all contaminated clothing. Rinse skin with water. P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if pre- sent and easy to do. Continue rinsing. Immediately call a POISON CENTER/ doctor. P370 + P378 In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.

Hazardous Ingredients

Hexamethylene-di-isocyanate, polymer [3-(2,3-epoxypropoxy)propyl]trimethoxysilane 4-isocyanatosulphonyltoluene hexamethylene-di-isocyanate

Other hazards

This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher

2.1 Classification of the substance or mixture

Classification (REGULATION (EC) No 1272/2008) as amended by GB-CLP Regulation, UK SI 2019/720, and UK SI 2020/1567) Flammable liquids, Category 3 H226: Flammable liquid and vapour. Acute toxicity, Category 4 H332: Harmful if inhaled. Serious eye damage, Category 1 H318: Causes serious eye damage. Skin sensitisation, Category 1 H317: May cause an allergic skin reaction. Specific target organ toxicity - single ex- H335: May cause respiratory irritation. posure, Category 3, Respiratory system

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.