Note: Ingredients listed on restricted chemical lists
EC/CAS
231-633-2/7664-38-2
Name of the chemical
phosphoric acid
Concentration
>=25-<50
EC/CAS
200-579-1/64-18-6
Name of the chemical
Formic acid
Concentration
>=25-<50
EC/CAS
203-961-6/112-34-5
Name of the chemical
2-(2-butoxyethoxy)ethanol
Concentration
>=1-<2.5
General Information
Revision date
2021-03-24
Product name
B067-K21 hebro HB-150 DS
1.2.1 Relevant identified uses
Decalcifying product for professional application in industry
Icons in SDS
Company Information
company name
hebro chemie- ZN der Rockwood Specialties Group
e-mail address of the competent person responsible for the Safety Data Sheet
msds.de@hebro-chemie.de
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H290, H302, H314
Hazard statements
Code
Statements
H290
May be corrosive to metals
H302
Harmful if swallowed
H314
Causes severe skin burns and eye damage.
Section 2
CLP CLASSIFICATION
Corrosive to metals, Category 1 H290: May be corrosive to metals. Acute toxicity, Category 4 H302: Harmful if swallowed. Skin corrosion, Category 1B H314: Causes severe skin burns and eye damage.
2.2 Label elements
REGULATION (EC) No 1272/2008)
Signal word
Danger
Hazard statements
H290 May be corrosive to metals. H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage.
Supplemental label elements
EUH071 Corrosive to the respiratory tract.
Prevention
P262 Do not get in eyes, on skin, or on clothing. P280 Wear protective gloves/ protective clothing/ eye protec- tion/ face protection.
Response
P303 + P361 + P353 IF ON SKIN (or hair): Take off immedi- ately all contaminated clothing. Rinse skin with water/ shower. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with wa- ter for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a POISON CENTER/ doctor.
Hazardous Ingredients
Orthophosphoric acid Formic Acid <=75%
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumula- tive and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. The information required is contained in this Material Safety Data Sheet.