No. 2 Biodiesel Blend

Hazard statements (CLP)

H226, H304, H315, H332, H351, H373, H411

Code

Statements

H226

Flammable liquid and vapour

2.3 Other hazards

H226 - Flammable liquids -- Category 3 PHNOC: Electrostatic charge may be generated during pumping H304 -- Aspiration Hazard -- Category 1 and other operations H315 -- Skin corrosion/irritation -- Category 2 H332 -- Acute toxicity, Inhalation -- Category 4 H351 -- Carcinogenicity -- Category 2 HHNOC: None known H373 -- Specific target organ toxicity (repeated exposure) -- Category 2 H411 -- Hazardous to the aquatic environment, chronic toxicity -- Category 2

2.2 Label elements

DANGER Flammable liquid and vapor May be fatal if swallowed and enters airways Causes skin irritation Harmful if inhaled Suspected of causing cancer May cause damage to organs through prolonged or repeated exposure Toxic to aquatic life with long lasting effects Obtain special instructions before use; Do not handle until all safety precautions have been read and understood; Keep away from heat/sparks/open flames/hot surfaces. - No smoking; Ground/bond container and receiving equipment; Use explosion-proof electrical (ventilation and lighting) equipment; Use only non-sparking tools; Take precautionary measures against static discharge; Do not breathe dust/fume/gas/mist/vapours/spray; Wash skin thoroughly after handling; Use only outdoors or in a well-ventilated area; Avoid release to the environment; Wear protective gloves/protective clothing and eye/face protection; IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; Do NOT induce vomiting; IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower; If skin irritation occurs: Get medical advice/attention; IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing; IF exposed or concerned Get medical advice/attention; Take off contaminated clothing and wash before reuse; In case of fire: Use CO2, dry chemical, or foam for extinction; Collect spillage; Store in a well-ventilated place. Keep cool; Dispose of contents/container to an approved waste disposal plant