ERTi-1, ERTi-2, ERTi-5(6Al/4V), ERTi-7, ERTi-12

health canada

Revision date : 2016-09-02

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS07 GHS08
Health risk rating 5
Safety risk rating 1
Environmental risk rating 3

Note: Ingredients listed on restricted chemical lists

EC/CAS

7440-67-7

Name of the chemical

Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV

Concentration

231-176- 0-6

EC/CAS

231-157-5/7440-47-3

Name of the chemical

Chromium‡

Concentration

0-11

EC/CAS

231-141-8/7440-31-5

Name of the chemical

Organometallic tin

Concentration

0-4.5

EC/CAS

231-072-3/7429-90-5

Name of the chemical

Aluminium

Concentration

0-8

General Information

Revision date

2016-09-02

Product name

ERTi-1, ERTi-2, ERTi-5(6Al/4V), ERTi-7, ERTi-12

1.2.1 Relevant identified uses

Titanium Welding Wire AWS Specification AWS A5.16 / ASME SFA 5.16

Emergency telephone

(800)364-6900

Icons in SDS

GHS07 GHS08

Company Information

company name

health canada

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H317, H341, H350, H361, H373, H412

Hazard statements

Code

Statements

H317

May cause an allergic skin reaction

H341

Suspected of causing genetic defects

H350

May cause cancer

H361

Suspected of damaging fertility or the unborn child

H373

May cause damage to organs through prolonged or repeated exposure

H412

Harmful to aquatic life with long lasting effects

Section 2

SECTION 2: Hazards identification

GHS US classification IMPORTANT: This section covers the hazardous material from which this product is manufactured. This data has been classified according to the criteria of the Global Harmonized System of Classification and Labeling of Chemicals (GHS) as required and defined in OSHA Hazard Communication Standard (29 CFR Part 1910.1200). The fumes and gases produced during welding with normal use are addressed in Section 8.

2.1 Classification of the substance or mixture

This product is not classified as hazardous according to applicable GHS hazard classification criteria. /Designation Ψ - Silica Crystalline a-Quartz Ω -Vanadium Pentoxide EU 67/548/EEC Classification/Designation Ω Ω - Vanadium Pentoxide

2.2 Label elements

Hazard Symbol – No symbol required

Signal word

No signal word required Danger

Hazard statements

Not Applicable H317 - May cause an allergic skin reaction H341 - Suspected of causing genetic defects H350 - May cause cancer H361 - Suspected of damaging fertility or the unborn child H373 - May cause damage to organs through prolonged or repeated exposure H412 - Harmful to aquatic life with long lasting effects

Precautionary statements

Not applicable Hazardous CAS# EINCSr Regulatory Hazard Classification/ IARCE NTPZ OSHAH 65ϴ Ingredient Designation 67/548/EECΔ Aluminum 7429-90-5 231-072-3 F- R10, R15, R17 - Chromium 7440-47-3 231-157-5 O - R9; Carc 1 Φ - R45; Muta 2 - R46; Repr 3 - R62; T+ - R26; 1 Ʃ Ʃ, 3 Ʃ K Ʃ Ʃ X Ʃ Ʃ T - R24/25, R48/23; C - R35, R42/43; N - R50, R53ΣΣ Iron 7439-89-6 231-096-4 None - Molybdenum 7439-98-7 231-107-2 Xn – R48/20/22;Xi-R36/37x - Nickel 7440.02-0 231-111-4 Carc3Ф-R40;T-R43, R48/23 1 K X Tantalum 7440-25-7 231-135-5 None - Tin 7440-31-5 231-141-8 None - Titanium 7440-32-6 231-142-3 None - Vanadium 7440-62-2 231-141-1 Xn – R20, R48/22; Xi – R41; N – R51, R53Ω 2B Ω Ω - X Ω Ω Zirconium 7440-67-7 231-176-9 F – R15,R17 - r-European Inventory of Existing Chemical Substances Number Δ-European Union Directive 67/548/EEC -Annex 1 E -International Agency for Research on Cancer (1 - Human Carcinogen, 2A - Probably Carcinogenic to Humans, 2B - Possibly Carcinogenic to Humans, 3 - Unclassifiable as to Carcinogenicity in Humans, 4 Probably Not Carcinogenic to Humans) Z - US National Toxicology Program (K-Known Carcinogen, S-Suspected Carcinogen) H-OSHA Known Carcinogen List ϴ-California Proposition 65 (X - On Proposition 65 list) -- Dashes indicate the ingredient is not listed with the IARC, NTP, OSHA or 65 Ф- Carcinogen, Mutagen or Reproductive Category per European Council Directive 67/548/EEC Annex 1 Ʃ - Metal and Chromium III Compounds Ʃ Ʃ - Chromium VI Compounds Ʃ Ʃ Ʃ - Chromium (VI) Trioxide EU 67/548/EEC Classification /Designation Y - Manganese Dioxide EU 67/548/EEC Classification/ Designation X - Molybdenum Trioxide EU 67/548/EEC P201 - Obtain special instructions before use P202 - Do not handle until all safety precautions have been read and understood P260 - Do not breathe dust/fume/gas/mist/vapors/spray P261 - Avoid breathing dust/fume/gas/mist/vapors/spray P272 - Contaminated work clothing should not be allowed out of the workplace P273 - Avoid release to the environment P280 - Wear protective gloves/protective clothing/eye protection/face protection P302+P352 - IF ON SKIN: Wash with plenty of soap and water P308+P313 - IF exposed or concerned: Get medical advice/attention P314 - Get medical advice and attention if you feel unwell P333+P313 - If skin irritation or rash occurs: Get medical advice/attention P362+P364 - Take off contaminated clothing and wash it before reuse P405 - Store locked up P501 - Dispose of contents/container in accordance with local/regional/national/international regulations. Warning! Avoid breathing welding fumes and gases, they may be dangerous to your health. Always use adequate ventilation. Always use appropriate personal protective equipment.

Classification (GHS-US)

Skin Sens. 1: H317 Muta. 2 H341 Cars. 1B H350 Repr 2 H361. STOT RE 2 H373 Aquatic Chronic: H412 GHS=US Labeling GHS07 GHS08

Principle Routes of Exposure

Respiratory System, Eyes and/or Skin Arc Rays: The welding arc can injure eyes and burn skin. Electric Shock: Arc welding & associated processes can kill. See Section 8. Fumes and Gases: Can be dangerous to your health. Welding fumes and gases cannot be classified simply. The composition and quantity of both are dependent upon the metal being welded, the process, procedures and electrodes used. Most fume ingredients are present as complex oxides and compounds and not as pure metals. When the electrode is consumed, the fume and gas decomposition products generated are different in percent and form from the ingredients listed in Section 3. Decomposition products of normal operation include those originating from the volatilization, reaction or oxidation of the materials shown in this section, plus those from the base metal and coating, etc., as noted above. Monitor for the materials identified in the list within this section. Fumes from the use of this product may contain complex oxides or compounds of the following elements and molecules: amorphous silica fume, beryllium, chromium, manganese and nickel. Other reasonably expected constituents of the fume would also include complex oxides of iron and silicon. Gaseous reaction products may include carbon monoxide and carbon dioxide. Ozone and nitrogen oxides may be formed by the radiation from the arc. Other conditions which also influence the composition and quantity of the fumes and gases to which workers may be exposed include: coatings on the metal being welded (such as paint, plating or galvanizing), the number of welders and the volume of the work area, the quality and amount of ventilation, the position of the welder's head with respect to the fume plume, as well as the presence of contaminants in the atmosphere (such as chlorinated hydrocarbon vapors from cleaning and degreasing activities). One recommended way to determine the composition and quantity of fumes and gases to which workers are exposed is to take an air sample inside the welder's helmet if worn or in the worker's breathing zone. See ANSl AWS F1.1, available from the "American Welding Society", PO. Box 351040, Miami, FL 33135. Also, from AWS is F1.3 "Evaluating Contaminants in the Welding Environment – A Sampling Strategy Guide", which gives additional advice on sampling.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.