General Information
Revision date
2015-07-15
Product name
VINOPRENE 706
Product Synonyms
NBR/PVC flux blend Not available Synthetic Polymers Non- Hazardous
Chemical name
Acrylonitrile-butadiene copolymer with polyvinyl chloride/ Nitrile polymer blend
CAS No.
9002-86-2
1.2.1 Relevant identified uses
Synthetic Polymers OSHA Status Non- Hazardous
supplier name
w Suppliers Input)
Icons in SDS
Company Information
company name
HB Chemical
GHS Information
Signal word
Warning
Section 2
SECTION 2: Hazards identification
Warning Not available. Signs and Symptoms of Exposure Not available.
Principle Routes of Exposure
Skin, eye, inhalation.
Medical Conditions Generally Aggravated by Exposure
If irritation occurs/persists from any rate of exposure, remove affected individual from area. Call medical attention. Provide before allowing reentry. Emergency overview A light yellow rubbery sheet, which is not normally irritating to eyes and skin. Ingestion and prolonged contact should be avoided. Some fumes may be released upon heating or cross linking and the end user (fabricator) must take the necessary precautions (mechanical ventilation, respiratory protection, etc.) to protect his employee from exposure.
Environmental effects
No significant environmental hazards are associated with this rubber release to the environment. This rubber is not soluble in water. Eye Contact May cause irritation. Skin Contact Contact with skin may cause irritation. Ingestion Not applicable. Inhalation Inhalation of fumes during hot processing can cause irritation to respiratory tract. Sensitization No cases of sensitization in humans have been reported. Chronic Not hazardous. NFPA Hazard Ratings Health- 1, Flammability - 1, Reactivity - 0, HMIS Hazard Ratings Health- 1, Flammability - 1, Reactivity - 0, Protection-B HMIS limitation statement The HMIS hazard ratings numbers are meant to give a quick indication of the relative hazards associated with the product. All of the information contained in the SDS should be consulted to assist with the safe handling of this material. Principal Hazardous Components ACGIH-TLV 5 (mg/m3). (Recommended for polymer dust)
