Note: Ingredients listed on restricted chemical lists
EC/CAS
64742-82-1
Name of the chemical
Naphtha (petroleum), hydrodesulfurized heavy
Concentration
25-35%
EC/CAS
64742-89-8
Name of the chemical
Solvent naphtha (petroleum), light aliph
Concentration
<10%
EC/CAS
64742-95-6
Name of the chemical
Solvent naphtha (petroleum), light arom
Concentration
<5%
EC/CAS
96-29-7
Name of the chemical
2-Butanonoxim (2020/1182)
Concentration
<1% 100%
General Information
Revision date
2016-11-03
Product name
Elite Trim Enamel High Gloss
1.2.1 Relevant identified uses
A full gloss alkyd based enamel of premium quality suitable for interior or exterior use
Icons in SDS
Company Information
company name
Haymes Paint
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H226, H315, H336
Hazard statements
Code
Statements
H226
Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
GHS Classification This material is hazardous according to health criteria of Safe Work Australia. HAZARDOUS SUBSTANCE Hazard Pictograms Flame Exclamation mark
Signal word
Warning Hazard Classification Flammable liquids - Category 3 Skin irritation - Category 2 Specific Target Organ Toxicity ( Single Exposure ) - Category 3 Hazard Statement(s) H226 Flammable liquid and vapour H315 Causes skin irritation H336 Exposure via inhalation may cause drowsiness or dizziness
Prevention
P102 Keep out of reach of children. P103 Read label before use. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P240 Ground/bond container and receiving equipment. P241 Use explosion-proof electrical/ventilating/light/and other equipment. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. P261 Avoid breathing mist, vapours or spray. P264 Wash exposed skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective clothing, gloves, eye/face protection, suitable respirator as required.
Response
P370+378 In case of fire. Use alcohol resistant foam or fine spray/water fog for extinction. P302+352 IF ON SKIN, wash with plenty of soap and water. P332+313 If skin irritation occurs get medical advice/attention. P361+364 Take off immediately all contaminated clothing and wash it before reuse. Product name Elite Trim Enamel High Gloss Issued 3/11/16 Verson 2.0 Page 1 of 7 Response continued P304+340 IF INHALED Remove victim to fresh air and keep at rest in a position comfortable for breathing. P312 Call a POISON CENTRE or doctor/physician if you feel unwell.
Storage
P403+235 Store in a well ventilated place. Keep cool. P410+412 Protect container from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Disposal
P501 Dispose of contents/container in accordance with local, regional, national, international regulations. SUSMP Poisons Schedule S5 Poison
Classifications
Classified as Dangerous Goods by the criteria of the "Australian Code for the Transport of Dangerous Goods by Road and Rail. Class 3 Flammable liquid
2.1 Classification of the substance or mixture
This material is hazardous according to health criteria of Safe Work Australia. HAZARDOUS SUBSTANCE. Hazard Pictograms : Flame Exclamation mark SIGNAL WORD : Warning Hazard Classification : Flammable liquids - Category 3 Skin irritation - Category 2 Specific Target Organ Toxicity ( Single Exposure ) - Category 3 Hazard Statement(s) : H226 : Flammable liquid and vapour. H315 : Causes skin irritation. H336 : Exposure via inhalation may cause drowsiness or dizziness.