Note: Ingredients listed on restricted chemical lists
EC/CAS
7789-75-5
Name of the chemical
Calcium fluoride
Concentration
2-10
EC/CAS
1310-58-3
Name of the chemical
Potassium or sodium hydroxide (20)
Concentration
0-0.5
EC/CAS
7440-47-3
Name of the chemical
Chromium‡
Concentration
15-25
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
1-10
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
1-15
General Information
Revision date
2017-01-01
Product name
E302-16, E308H-16, 308-15, 308-17, E308-16, E309-16, E309L-16, E310-16, E312- 16, E316-16, E316L-16, E347-16, E410-16, E502-16, E505-16 and Super Missileweld (Coated)
1.2.1 Relevant identified uses
Metal Welding
1.2.2. Uses advised against
No further relevant information available #NL
Icons in SDS
Company Information
company name
Harris Products Group
e-mail address of the competent person responsible for the Safety Data Sheet
sales@harrisnz.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H350, H372, H400, H412
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
H350
May cause cancer
H372
Causes damage to organs through prolonged or repeated exposure
H400
Very toxic to aquatic life
H412
Harmful to aquatic life with long lasting effects
Section 2
Classification according to GHS
Classified according to the Globally Harmonised System of Classification and labelling of Chemicals (GHS) including Work, Health and Safety regulations, Australia.
2.1 Classification of the substance or mixture
EMERGENCY OVERVIEW: Solid metallic products are generally classified as “articles” and do not constitute a hazardous material in solid form under the definitions of the GHS. Any articles manufactured from these solid products would be generally classified as non-hazardous. However, some hazardous elements contained in these products can be emitted under certain processing conditions such as but not limited to: burning, melting, cutting, sawing, brazing, grinding, machining, milling, and welding. Products in the solid state present no fire or explosion hazard. Small chips, fines, and dust may ignite readily, though. The following classification information is for the hazardous elements which may be released during processing. Skin Sensitisation – 1, H317 Carcinogenicity – 1B, H350 Specific Organ Toxicity – RE 1, H372 Aquatic Acute – 1, H400 Aquatic Chronic – 3, H412 Page 2 of 11
Signal word
Danger
Hazard statements
H317 - May cause an allergic skin reaction H350 – May cause cancer H372 - Causes damage to organs through prolonged or repeated exposure H400 – Very toxic to aquatic life H412 – Harmful to aquatic life with long lasting effects
Precautionary statements
P201 - Obtain special instructions before use P202 - Do not handle until all safety precautions have been read and understood P260 - Do not breathe dust/fume/gas/mist/vapours/spray P261 - Avoid breathing dust/fume/gas/mist/vapours/spray P264 - Wash thoroughly after handling P261 – Avoid breathing dust/fume/gas/mist/vapours/spray P270 - Do not eat, drink or smoke when using this product P272 - Contaminated work clothing should not be allowed in the workplace P273 - Avoid release to the environment P280 - Wear protective gloves/protective clothing/eye protection/face protection P302+P352 - IF ON SKIN: Wash with plenty of soap and water P308+P313 - IF exposed or concerned: Get medical advice/attention P314 - Get medical advice and attention if you feel unwell P321 - Specific treatment (see label) P321 – Specific treatment (see label) P333+P313 - If skin irritation or rash occurs: Get medical advice/attention P362+P364 - Take off contaminated clothing and wash it before reuse P391 – Collect spillage
Storage
P405 - Store locked up
Disposal
P501 - Dispose of contents/container in accordance with regulations Unknown Acute Toxicity Not available
2.3 Other hazards
No information provided