ProFlex Top Coat 2025 NT (All color variants)

Hazard statements (CLP)

H350, H372

Code

Statements

H350

May cause cancer

SECTION 2: Hazards identification

WHMIS 2015 2.1 EMERGENCY OVERVIEW: This Safety Data Sheet (SDS) must be retained and made accessible to employees and users of this product in

2.1 Classification of the substance or mixture

Carcinogenicity, Category 1A (H350) Specific Target Organ Toxicity, Repeated Exposure (STOT RE), Category 1 (H372) Hazard Statements: H350: May cause cancer by inhalation. H372: Causes damage to organ (lungs) through prolonged and repeated exposure (inhalation).

Signal word

Danger Hazards Classification of Substance Carcinogenicity, Category 1A (H350) Specific Target Organ Toxicity, Repeated Exposure (STOT RE), Category 1 (H372) Hazard Statements H350: May cause cancer by inhalation H372: Causes damage to organ (lungs) through prolonged and repeated exposure (inhalation)

Precautionary statements

P201: Obtain special instructions before use. P202: Do not handle until all safety precautions have been read and understood. P260: Do not breathe dust generated from sanding, cutting, grinding, or mechanical abrasion of dried material. P264: Wash thoroughly after handling. P270: Do not eat, drink or smoke when using this product. P280: Wear protective gloves and eye protection. P284: Wear respiratory protection when required.

Response

Phases P308 + P313 IF exposed or concerned Get medical advice/attention. P314: Get medical advice/attention if you feel unwell.

Storage

Please refer to Section 7 for Storage information. P405: Store locked up.

Disposal

Please refer to Section 13 for Disposal information. P501: Dispose of contents and/or container in accordance with local, regional, national and/or international regulation.

2.3 Other hazards

None known when used as intended. Dust generated from sanding, cutting, or abrasion of dried material may pose respiratory hazards.

Additional information

Contains crystalline silica, which may cause cancer and chronic lung disease through prolonged inhalation exposure to respirable dust. Handle in accordance with recommended exposure controls and personal protective equipment guidelines. 2.3 HEALTH HAZARDS OR RISKS FROM EXPOSURE: 2.3.1 SYMPTOMS OF OVEREXPOSURE BY ROUTE OF EXPOSURE: The most significant route of exposure is inhalation of respirable dust or mist during sanding, cutting, spraying, or abrasion of dried material. Acute: Inhalation: May cause coughing, throat irritation, shortness of breath, or respiratory discomfort if dust, mist, or spray droplets are inhaled. Severe overexposure may aggravate asthma-like symptoms. If not breathing, give artificial respiration. If breathing is difficult, give oxygen by qualified person. Get medical attention if symptoms develop or persist. Skin Contact: May cause mild mechanical irritation. No evidence supports classification as a skin sensitizer under GHS criteria. Eye Contact: Direct contact may cause mechanical eye irritation. Flush with water for several minutes if irritation occurs. Ingestion: May cause gastrointestinal irritation, nausea, or discomfort. Do not ingest. Ingestion is not expected during normal use. Do NOT induce vomiting unless directed by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as collar, tie, belt, or waistband. Get medical attention if symptoms appear. Chronic: Prolonged or repeated inhalation of respirable crystalline silica dust may cause permanent lung damage, respiratory impairment, or lung scarring. Carcinogenic Effects: Classified as Carcinogenicity, Category 1A due to respirable crystalline silica (inhalation hazard only). Chronic exposure may increase the risk of lung cancer. Mutagenic Effects: No known mutagenic effects are expected from product components under normal occupational exposure conditions.

Teratogenic Effects

Not known based on available data Developmental: No specific developmental toxicity has been reported; however, prolonged exposure to airborne particulates should be avoided, especially during pregnancy. Toxicity: Not known based on available data. Adverse effects: Adverse effects may include respiratory tract irritation, lung damage from long-term silica exposure and aggravation of pre-existing respiratory conditions such as asthma or chronic bronchitis.