Sigma Cure 7211 UCB Pt1

Hazard statements (CLP)

H227, H302, H304, H315, H318, H341, H350, H360, H370, H372, H401, H411

Code

Statements

H227

Combustible liquid

SECTION 2: Hazards identification

Physical hazards

Flammable liquids Category 4

Health hazards

Acute toxicity, oral Category 4 Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 1 Germ cell mutagenicity Category 2 Carcinogenicity Category 1A Reproductive toxicity Category 1B Specific target organ toxicity, single exposure Category 1 Specific target organ toxicity, repeated Category 1 exposure Aspiration hazard Category 1

Environmental hazards

Hazardous to the aquatic environment, acute Category 2 hazard Hazardous to the aquatic environment, Category 2

Signal word

Danger

Hazard statements

Combustible liquid. Harmful if swallowed. May be fatal if swallowed and enters airways. Causes skin irritation. Causes serious eye damage. Suspected of causing genetic defects. May cause cancer. May damage fertility or the unborn child. Causes damage to organs. Causes damage to organs through prolonged or repeated exposure. Toxic to aquatic life. Toxic to aquatic life with long lasting effects.

Prevention

This is a hazardous chemical product. It is important that all employees working with this product receive initial and periodic refresher training in its safe use and handling, both for basic risk

Response

If swallowed: Immediately call a poison center/doctor. Rinse mouth. Do NOT induce vomiting. If on skin Wash with plenty of water. If in eyes Rinse cautiously with water for several minutes Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash before reuse. In case of fire: Use appropriate media to extinguish. Collect spillage.

Storage

Store in a well-ventilated place. Keep cool. Store locked up.

Disposal

Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard(s) not otherwise May react dangerously if inadvertently mixed with other components of this resin system resulting classified (HNOC) in elevated temperatures, release of flammable and/or toxic vapors, foaming, solidification, and vessel rupture or other equipment damage. Hazardous emissions are normally generated when cores or molds are exposed to molten metal during pouring, cooling and shakeout operations Formaldehyde may be released from this product during processing

Additional information

9.082% of the mixture consists of component(s) of unknown acute oral toxicity. 5.694% of the mixture consists of component(s) of unknown acute dermal toxicity. 11.082% of the mixture consists of component(s) of unknown acute inhalation toxicity. 1% of the mixture consists of component(s) of unknown acute hazards to the aquatic environment. 1% of the mixture consists of component(s) of unknown long-term hazards to the aquatic environment.

2.1 Classification of the substance or mixture

Category 1 Environmental hazards Hazardous to the aquatic environment, acute Category 2 hazard Hazardous to the aquatic environment, Category 2 long-term hazard OSHA defined hazards Not classified.