20-015C Techniset NF Resin Pt1

Physical hazards

Flammable liquids Category 4

Health hazards

Acute toxicity, oral Category 4 Carcinogenicity Category 2

Environmental hazards

Hazardous to the aquatic environment, acute Category 2 Hazardous to the aquatic environment, Category 2

Long term hazards

OSHA defined hazards Not classified.

Signal word

Warning

Hazard statements

Combustible liquid. Harmful if swallowed. Suspected of causing cancer. Toxic to aquatic life. Toxic to aquatic life with long lasting effects.

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. Prevent personnel exposure to dust, smoke, and fumes generated from pouring, cooling and shakeout operations through the use of effective local and general exhaust ventilation systems and/or personal protective equipment. Personnel exposure monitoring should be conducted periodically to verify these systems are operating in a manner that prevents employee exposures above applicable criteria. Prevent accidental mixing of the different components of this resin system through effective unloading system and process design, equipment labeling, posted procedures, employee training, and verification audit programs. Prevent mixing of spill residues by providing independant spill collection systems for the different components of this resin system.

Response

If swallowed Call a poison center/doctor if you feel unwell. If exposed or concerned Get medical advice/attention. Rinse mouth. In case of fire: Use appropriate media to extinguish. Collect spillage.

Storage

Store in a well-ventilated place. Keep cool. Store locked up.

Disposal

Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard(s) not otherwise May react dangerously if inadvertently mixed with other components of this resin system resulting

Classified (HNOC)

in elevated temperatures, release of flammable and/or toxic vapors, foaming, solidification, and vessel rupture or other equipment damage. Hazardous emissions are normally generated when cores or molds are exposed to molten metal during pouring, cooling and shakeout operations. Formaldehyde may be released from this product during processing.

Additional information

94.72% of the mixture consists of component(s) of unknown acute oral toxicity. 95.05% of the mixture consists of component(s) of unknown acute hazards to the aquatic environment. 95.05% of the mixture consists of component(s) of unknown long-term hazards to the aquatic environment.