Note: Ingredients listed on restricted chemical lists
EC/CAS
203-806-2/110-82-7
Name of the chemical
Cyclohexane
Concentration
30-60%
EC/CAS
200-661-7/67-63-0
Name of the chemical
Propan-2-ol
Concentration
10-30%
EC/CAS
227-813-5/5989-27-5
Name of the chemical
(R)-p-mentha-1,8-diene
Concentration
1-5%
EC/CAS
204-696-9/124-38-9
Name of the chemical
Carbon dioxide CO2
Concentration
1-5%
EC/CAS
204-696-9/110-54-3
Name of the chemical
n-Hexan (790/2009)
Concentration
1-5%
EC/CAS
203-777-6
Name of the chemical
n-Hexan (790/2009)
Concentration
5-10%
General Information
Revision date
2010-11-01
Product name
FLUXCLENE Aerosol
Product name
FLUXCLENE Aerosol
Identification on the label/Trade name
AEROSOLS (CYCLOHEXANE)
supplier name
H K WENTWORTH PTY LIMITED
Icons in SDS
Company Information
company name
H K WENTWORTH PTY LIMITED
Hazard Codes
Hazard statements (CLP)
H229
Hazard statements
Code
Statements
H229
Pressurized container: may burst if heated
Section 2
SECTION 2: Hazards identification
Hazard statements
R11 R43 R36/38 R50/53 Highly flammable. May cause sensitisation by skin contact. Irritating to eyes and skin. Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R67 Vapours may cause drowsiness and dizziness.
Precautionary statements
A1 Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. A2 S2 S9 S16 S23 S24/25 S51 Do not spray on a naked flame or any incandescent material. Keep out of the reach of children. Keep container in a well-ventilated place. Keep away from sources of ignition - No smoking. Do not breathe vapour/spray. Avoid contact with skin and eyes. Use only in well-ventilated areas. HAZARD ID 2 The above phrases are the risks associated with the product
Environmental hazards
Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point. Use appropriate containment to avoid environmental contamination. Avoid release to the environment. Refer to special instructions/safety data sheets. Dispose of waste and residues in accordance with local authority requirements.
Other physicochemical hazards
Aerosol containers can explode when heated, due to excessive pressure build-up. When sprayed on a naked flame or any incandescent material the aerosol vapours can be ignited
Hazardous Ingredients
(According to criteria of DG CLASS Class 2 Gases PACKING GROUP N/A UN NO. 1950 NOHSC). DANGEROUS GOODS (According to ADG Code). 1 / 6
