General Information
Revision date
2019-06-05
Product name
Oak-Mor Premium; Toasted, Toasted HT; Toasted LT; Toasted 2mm Chip
Product Synonyms
White oak: Quercus alba
Chemical name
Oak Wood Granulated and Chips
1.2.2. Uses advised against
Avoid generating airborne dust
Icons in SDS
Company Information
company name
Gusmer Enterprises, Inc
GHS Information
Signal word
Danger
Section 2
OSHA HCS Classification
Carcinogenicity (Category 1A) Combustible Dust
Signal word
Danger
Precautionary statements
May cause cancer by inhalation. Obtain special instructions before use. May form combustible dust concentrations in air. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. IF exposed or concerned: Get medical advice/attention. Store locked up. Dispose of contents/ container to an approved waste disposal plant. Ventilation recommended. 2.3 Emergency Overview
Appearance/Odor
Oak-Mor: Toasted, Toasted HT; Toasted LT; Toasted Fine Toast; Special; Toasted 2mm Chip - Brown to dark brown oak wood granules, powder and/or fragments. Typical oak odor. Oak-Mor: Premium - Light tan to golden brown oak wood granules, powder and/or fragments. Typical oak odor. Cellufine: Cellufine 1; Cellufine 2; Cellufine H - Light tan to golden brown oak wood granules, powder and/or fragments. Typical oak odor. Oak Avantage: American; French - Brown to dark brown oak wood granules, powder and/or fragments. Typical oak odor.
2.3 Other hazards
Warning This product consists of white oak (quercus alba) heartwood or French oak (quercus rubor or quercus sessiliflora). The primary health hazard posed by this product is dust inhalation which can cause respiratory system irritation. Contact with skin and eyes can also cause irritation. Prolonged or repeated inhalation of wood dust may cause cancer. Wood dust is listed as a carcinogen by NTP, OSHA, and IARC. IARC - Group 1: Carcinogenic to humans; sufficient evidence of carcinogenicity. Product may form combustible dust concentrations in air during processing. Specifically, in instances where product dust is suspended in air in sufficient concentrations and in proximity to an ignition source. Users of this product should examine the potential to generate dusts during handling and processing and related combustibility hazards and controls.