GWT-7140H

Hazardous Ingredients

C.LIM: Ceiling Limit INP: Inhalable Particulate OM: Oil mist WF: Wax fume RF: Respirable fraction ST: Skin TWA - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Section III - Physical/Chemical Characteristics - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Boiling Point: > 200º F Specific Gravity (H2O=1): 1.315 – 1.335 Vapor Pressure: N/A Melting Point: N/A Vapor Density: N/A Evaporation Rate (H2O=1): N/A Volatiles (wt/wt) 65-70% (water) Viscosity: (cps) 50 - 100 Solubility In Water: 100% pH: 3.0 – 4.0 Appearance And Odor: Clear to slightly hazy, colorless to yellow liquid with a slight amine odor Flash Point: N/A Flammable Limits LEL: N/A UEL: N/A Method Used: N/A Extinguishing Media: Water Spray, Carbon Dioxide, Foam, Dry Chemical Special Fire Fighting Procedures: Product is a water solution and nonflammable. In a fire, this product may build up pressure and rupture a sealed container; cool exposed containers with water spray. Use self-contained breathing apparatus in confined areas; avoid breathing vapors or dust. Unusual Fire and Explosion Hazards: This product may produce hazardous fumes or hazardous decomposition products. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Section V - Reactivity Data - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Stability: Stable Conditions to Avoid: None Incompatibility (Materials to Avoid): Product is incompatible with alkalis. Hazardous Decomposition or Byproducts: Thermal decomposition may release toxic and/or hazardous gases such as aluminum, Cl2, and HCl. Hazardous Polymerization: May not occur Personnel Conditions to Avoid: Extended contact with skin or inhalation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Section VI - Health Hazard Data - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Route(s) of Entry: Inhalation: Mild Skin: Mild Ingestion: Mild Health Hazards (Acute and Chronic): Acute and chronic health hazards are difficult to accurately assess for mixtures. In general see the first aid section for acute effects and long term effects would have to be derived from these immediate results. Specific chronic effects can be studied from the individual hazardous chemicals as indicated under Section II as the best guess without extensive laboratory studies. Carcinogenicity: NTP: None Known IARC Monographs: None Known OSHA: None Signs and Symptoms of Exposure: Prolonged contact may cause burning of the skin, eyes, and mucous membranes. Exposure to material may be corrosive to body tissue. Medical Conditions Generally Aggravated By Exposure: A knowledge of available toxicology information and of the physical properties of the material suggests that exposure is unlikely to aggravate existing medical conditions. However, due to the widely varying uses and personal exposures possible, an individual will have to evaluate his/her particular situation. This is an acidic irritant, and has been seen to effect the nervous system, liver, and kidney as a toxin when over exposed to material to a limited and varying degree. 3 Routes of Exposure INHALATION: Inhalation of mist or spray may irritate respiratory tract. SKIN CONTACT: This product may cause skin irritation, especially on prolonged contact. SKIN ABSORBTION: No Data EYE CONTACT: Direct eye contact may cause irritation, redness, swelling and pain that can be come severe on prolonged contact. Prolonged exposure to Aluminum salts may cause conjunctivitis. INGESTION: May cause gastrointestinal irritation, nausea, vomiting and diarrhea.\ Effects of Overexposure ACUTE OVEREXPOSURE: Possible eye, skin and respiratory tract irritation. CHRONIC OVEREXPOSURE: May aggravate existing skin, eye, and lung conditions. Persons with kidney disorders have an increased risk from exposure based on general information found on aluminum salts.