GSP 1750 Part A

EU Classification

29 CFR §1910.1200 (d)

2.1 Classification of the substance or mixture

Skin corrosion/irritation - Category 2 Eye damage/irritation - Category 2A Skin sensitization - Category 1 Carcinogenicity - Category 1A Specific target organ toxicity - single exposure - Category 3 Specific target organ toxicity - repeat exposure - Category 1 Label elements according to 29 CFR §1910.1200 (f):

Signal word

Danger

Hazard statements

Causes skin irritation. Causes serious eye irritation. May cause an allergic skin reaction. May cause cancer by inhalation. May cause respiratory irritation. Causes damage to lungs through prolonged or repeated exposure if inhaled.

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. Do not breathe mist/vapors/spray. Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly after handling. Contaminated work clothing must not be allowed out of the workplace.

Response

If exposed or concerned: Get medical advice/attention. Get medical advice/attention if you feel unwell. If on skin: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If inhaled: Remove person to fresh air and keep comfortable for breathing. Call a poison center/doctor if you feel unwell.

Storage

Store locked up.

Disposal

Dispose of contents in accordance with all local, regional, national and international regulations. Hazards not otherwise classified in the classification process: None known 2.4 Ingredients (Present at ≥ 1%) of unknown toxicity: None 2.5

Additional information

If product is in liquid or cured (solid) form, physical or health hazards listed related to dust are not considered significant. However, cutting or grinding of cured material may release microcrystalline silica (Quartz) which may present a chronic respiratory hazard. Lung damage, including silicosis, is known to occur from excessive inhalation of respirable crystalline silica