Graphite for Foundry

SECTION 2: Hazards identification

Principle Routes of Exposure

INHALATION: Yes ▪ SKIN: No ▪ INGESTION: Yes

Health hazards

acute and chronic) ▪ Inhalation of dust may result in irritation of mucous membranes. Long term inhalation may result in pneumoconiosis. Carcinogenicity: ▪ NTP: No ▪ IARC Monographs: No

Medical Conditions Generally Aggravated by Exposure

No medical conditions are known to be aggravated by this product. Section V. First Aid Measures Eyes: Flush thoroughly with water for 15 minutes. Get medical attention. Skin: Wash exposed skin with soap and water. If irritation persists get medical attention. Launder severely contaminated clothing before reuse. Ingestion: Do not induce vomiting. Get medical attention. Inhalation: Remove to fresh air area. If breathing becomes difficult, get medical attention. Section VI. Fire fighting Measures Flash Point: (method) Not applicable Flammable Limits: ▪ LEL: Not applicable ▪ UEL: Not applicable Extinguishing Media: Water, carbon dioxide, foam or dry chemical. Special Fire Fighting Procedures: Wear NIOSH approved self contained breathing apparatus to fight a fire involving this material. Unusual fire and Explosion None 2| P a g NFPA Hazard Rating: ▪ Health: 1 ▪ Flammability: 0 ▪ Reactivity: 0 Section VII. Accidental Release Measures Spill/Leak Procedures: Carefully sweep up material and wash floor with soap and water. Containerize for solid waste disposal. Section VIII. Handling and Storage Handling and Storage Precautions: Keep containers tightly closed when not in use. Graphite causes slippery conditions. Graphite, being conductive, can cause short circuits and other electrical malfunctions. Section IX. Exposure Controls/Personal Protection Respiratory Protection (specify Use NIOSH/MSHA approved mask for chemical products if ACGIH, type):

Appearance/Odor

Gray None Specific Gravity (H2O=1): 2.25 Boiling Point: Not applicable Melting Point: >5000F Vapour Pressure (mm Hg): Not applicable Vapour Density (air=1): Not applicable 3| P a g Section XI. Stability and Reactivity Stability: Material is stable. Incompatibility (materials to avoid): Strong oxidizing agents, acids and alkalis. Hazardous Decomposition On burning, may release carbon dioxide and carbon monoxide. Products: