JB Weld Wood Restore Liquid Hardener

SECTION 2: Hazards identification

OSHA defined hazards This product is Hazardous according to the Hazardous Substances (Classification) Regulations 2001. 3.1B Flammable Liquids: high hazard 6.1E (oral) Substances that are acutely toxic 6.3B Substances that are mildly irritating to the skin 6.4A Substances that are irritating to the eye 6.5B Substances that are contact sensitisers HSNO Approval Number HSR002621. N.O.S. (Flammable) Group Standard 2006 4 May 2016 Issuing Date 23-June 2016 Revision Date: 23-June 2016 Revision Number 1 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Product definition

Product SDS Name Wood Restore – Liquid Hardener J-B Weld FG SKU Part Numbers Covered 40001 J-B Weld Product Names Covered J-B Weld Wood Restore Liquid Hardener J-B Weld Product Type Solvent Based Sealer Recommended use of the chemical and restrictions on use Recommended Use Wood Sealer Uses advised against No information available Details of the supplier of the safety data sheet Supplier Name J-B WELD COMPANY,LLC Supplier Address 1130 COMO ST SULPHUR SPRINGS, TX 75482 USA Emergency Telephone Numbers Transportation Emergencies: Chemtrec (24 hour transportation emergency response info): 800-424-9300 or 703-527-3887 Poison/Medical Emergencies Poison Control Centers (24 hour emergency poison / medical response info) 800-222-1222 Supplier Email info@jbweld.com Supplier Phone Number 903-885-7696 ___________________________________________________________________________________________

Physical hazards

Flammable liquids Category 2

Health hazards

Serious eye damage/eye irritation Category 2A Specific target organ toxicity, single exposure Category 3 narcotic effects

Environmental hazards

Hazardous to the aquatic environment, acute hazard Category 3 OSHA defined hazards Not classified.

Signal word

Danger

Hazard statements

Highly flammable liquid and vapor. Causes serious eye irritation. May cause drowsiness or dizziness. Harmful to aquatic life.

Prevention

Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Avoid breathing mist or vapor. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear protective gloves/eye protection/face protection.

Response

If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Call a poison center/doctor if you feel unwell. In case of fire: Use appropriate media to extinguish.

Storage

Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool. Store locked up.

Disposal

Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard(s) not otherwise Static accumulating flammable liquid can become electrostatically charged even in bonded

Classified (HNOC)

and grounded equipment. Sparks may ignite liquid and vapor. May cause flash fire or explosion.

Additional information

100% of the mixture consists of component(s) of unknown acute hazards to the aquatic environment.