Note: Ingredients listed on restricted chemical lists
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
30-60%
EC/CAS
37244-96-5
Name of the chemical
nepheline syenite
Concentration
10-<30%
EC/CAS
13463-67-7
Name of the chemical
Reaction mass of titanium dioxide and silver chloride
Concentration
<10%
EC/CAS
90-72-2
Name of the chemical
2,4,6-tris(dimethylaminomethyl)phenol
Concentration
<10%
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
0.1-<1
General Information
Revision date
2017-01-19
Product name
Epoxy Putty Stick - Plastic
Emergency telephone
the NZ Poisons Centre 0800 POISON
Icons in SDS
Company Information
company name
Griffiths Equipment Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
sales@griffiths.co.nz
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H412
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
GHS Classification This product is Hazardous according to the Hazardous Substances (Classification) Regulations 2001. 6.5B Substances that are contact sensitisers HSNO Approval Number HSR002624. N.O.S. (Subsidiary Hazard) Group Standard 2006 4 May 2016 SAFETY DATA SHEET Issuing Date 19-Jan 2017 Revision Date: 19-Jan 2017 Revision Number 1 1. IDENTIFICATION
Product definition
J-B Weld FG SKU Part Numbers Covered PLASTICWELD EPOXY PUTTY STICK 8237AUS Australia Contact Information New Zealand Contact Information J-B Weld Distributor: HPP Lunds J-B Weld Distributor: Griffith Equipment Ltd. Address: 1/195 Jackson Rd, Sunnybank Hills Qld 4109 Address: 22-24 Olive Rd., Penrose, Auckland New Zealand 1061 Telephone: 1300 306 781 Telephone: +64 9 5254577 Emergency Phone Number For advice in an emergency, In Australia contact a Poisons Information Centre 13 11 26 or In New Zealand contact NZ Poisons Centre 0800 poison (0800 764 7667) or a doctor at once. Company Name J-B Weld Company LLC, USA Address 1130 Como Street, Sulphur Springs TX 75482-4502, United States Telephone: 011 903 885 7696
2.1 Classification of the substance or mixture
Classified as Hazardous according to the Globally Harmonized System of Classification and labelling of Chemicals (GHS) including Work, Health and Safety regulations, Australia. Not classified as Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. (7th edition) Eye Damage/Irritation: Category 2A Hazardous to the Aquatic Environment – Long-Term Hazard: Category 3 Sensitization – Skin: Category 1 Skin Corrosion/Irritation: Category 2
Signal word
WARNING
Hazard statements
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P103 Read label before use. Disposal P501 Dispose of contents/container to an approved waste disposal plant.
Hazard pictograms
Exclamation mark _____________________________________________________________________________________________ Page 1 / 7 PLASTICWELD EPOXY PUTTY STICK Revision Date: 19/01/2017 _____________________________________________________________________________________________
Prevention
P261 Avoid breathing dust/fume/gas/mist/vapours/spray. P264 Wash contaminated skin thoroughly after handling. P272 Contaminated work clothing should not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection.
Response
P302+P352 IF ON SKIN: Wash with plenty of soap and water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P332+P313 If skin irritation occurs: Get medical advice/attention. P337+P313 If eye irritation persists: Get medical advice/attention. P362 Take off contaminated clothing and wash before reuse.