General Information
Revision date
2015-09-15
Product name
Decor Spray Enamel
Manufacturer Name
GPM
Icons in SDS
Company Information
company name
GPM
Section 2
Hazardous Ingredients
INGREDIENT CAS NUMBER WT.% OCCUPATIONAL VAPOR EXPOSURE LIMITS PRESSURE TLV PEL mmHg@20°C Acetone 67-64-1 35 — 38 750 ppm 1000 ppm 186.0 Propane/n-Butane Blend 68476-86-8 32 — 36 1000 ppm 80.0 p.s.i. (S) Toluene 108-88-3 6 — 14 20 ppm 100 ppm 22.0 Aliphatic Hydrocarbon 64742-49-0 1-8 300ppm 18.0 (S)Xylene 1330-20-7 0.5 - 3.0 100 ppm 14.0 (S) Ethyl Benzene 100-41-4 0.2 - 0.8 100 ppm 12.0 Carbon Black(1) 1333-86-4 0.1-0.5 3.5 mg/m? NA Hydrous Calcium Magnesium Silicate (2) 14807-96-6 3-7 2 mg/m? NA Titanium Dioxide (3) 13463-67-7 1-7 10mg/m? 15mg/m? NA VM&P Naphtha (4) 8030-30-6 1-14 300 ppm 5.2 (1) -In CDS-2, 10 only. (2)-—InCDS-10 only. (3)—In CDS- 1, 4 only. (4) —In CDS — 2, 10 only. (S) - This ingredient is subject to the reporting requirements of Section 313 SARA Title III. NA - Not applicable. NE - Not established. SECTION 3 - PHYSICAL DATA VAPOR DENSITY: [X] HEAVIER _[ ] LIGHTER THAN AIR BOILING RANGE: <0O°F EVAPORATION RATE: [] FASTER = [X] SLOWER THAN ETHER 89-97% VOLATILE VOLUME APPEARANCE/ODOR: Thin colored liquid/solvent DENSITY: 5.8-6.4 Wt(Ib.)/Gal VOLATILE ORGANIC COMPOUND(VOC) MAXIMUM: Nonflat 65% Flat 60% MIR: Flat 1.20 Nonflat 1.40 SECTION 4 - FIRE AND EXPLOSION HAZARD DATA FLAMMABILITY CLASSIFICATION: OSHA Class IA FLASH POINT: <-138°F LEL: 2.0 DOT ORM-D EXTINGUISHING MEDIA: [X] FOAM =[] ALCOHOL FOAM [X]CO2 [X] DRY CHEMICAL [X]WATERFOG [] OTHER UNUSUAL FIRE AND EXPLOSION HAZARDS: Closed containers may explode when exposed to extreme heat. Isolate from heat, sparks and open flame. Vapors may accumulate and travel to ignition sources distant from handling site. SPECIAL FIRE FIGHTING PROCEDURES: Use a self-contained breathing apparatus with full face mask in a positive pressure demand mode. Treat as a volatile liquid fire. Water spray may be ineffective. If water spray is used, fog nozzles are preferable. Water may be used to cool sealed containers to prevent pressure build-up and possible explosion or auto-ignition when exposed to the heat of a fire. HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide and unidentified organic compounds. Color Decor Spray Enamel SECTION 5 - HEALTH HAZARD DATA EFFECTS OF OVEREXPOSURE: INHALATION: Exposure to vapors, mists, or sanding dusts may cause moderate irritation to the lungs, nose, and throat. May also cause dizziness, nausea, fatigue, or headache. Vapors or spray mists may be irritating to eyes, nose or throat. SKIN CONTACT: Exposure may cause mild irritation. Prolonged exposure may cause drying and cracking. EYE CONTACT: Causes irritation, including redness, stinging and watering. INGESTION: Moderately toxic in large amounts. Could cause drowsiness, nausea or headache. (See additional information in Section 9). CARCINOGENICITY: This product contains carbon black, titanium dioxide, and ethyl benzene (see section 2). Carbon black, titanium dioxide and ethyl benzene have been classified by IARC (not NTP or OSHA) as possible carcinogens for humans (2B) from lab animal studies. MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE: Preexisting skin, eye and respiratory disorders may be aggravated by exposure to this product. PRIMARY ROUTE(S) OF ENTRY: [X] DERMAL [X] INHALATION [ ] INGESTION